# GITHUB Cheat Sheet

## Git - Tutorial

> **Excerpt**
>
> A version control system (VCS) allows you to manage a collection of files and gives access to different versions of these files.

***

> This tutorial explains the usage of the distributed version control system Git via the command line. The examples were done on Linux (Ubuntu), but should also work on other operating systems like Microsoft Windows.

### [1. Introduction into version control systems](https://www.vogella.com/tutorials/Git/article.html#introduction-into-version-control-systems)

#### [1.1. What is a version control system?](https://www.vogella.com/tutorials/Git/article.html#versioncontrolssystems)

A version control system (VCS) allows you to manage a collection of files and gives access to different versions of these files.

The VCS allows you to capture the content and structure of your files at a certain point in time. You can use the VGS to switching between these versions and you can work on different versions of these files in parallel. The different versions are stored in storage system which is typically called a _repository_. The process of creating different versions (snapshots) in the repository is depicted in the following graphic.

![Creating snapshots](https://www.vogella.com/tutorials/Git/img/vcs_state10.png)

In this example, your repository contains two versions, one with three files and another version with four files, two one them in the same state as in the first version, one modified one and another new one.

VCS are very good in tracking changes in text files. For example, you may track changes in HTML code or Java source code. If is also possible to use VCS for other file types but VCS are not that efficient to trace changes in binary files.

A localized version control system keeps local copies of the files. This approach can be as simple as creating a manual copy of the relevant files.

A centralized version control system provides a server software component which stores and manages the different versions of the files. A developer can copy (checkout) a certain version from the central sever onto their individual computer.

Both approaches have the drawback that they have one single point of failure. In a localized version control systems it is the individual computer and in a centralized version control systems it is the server machine. Both system makes it also harder to work in parallel on different features. To remove the limitations of local and centralized version control systems, distributed version control system have been created.

#### [1.2. Distributed version control systems](https://www.vogella.com/tutorials/Git/article.html#dvcs_definition)

In a distributed version control system each user has a complete local copy of a repository on his individual computer. The user can copy an existing repository. This copying process is typically called _cloning_ and the resulting repository can be referred to as a _clone_.

Every clone contains the full history of the collection of files and a cloned repository has the same functionality as the original repository.

Every repository can exchange versions of the files with other repositories by transporting these changes. This is typically done via a repository running on a server which is, unlike the local machine of a developer, always online. Typically, there is a central server for keeping a repository but each cloned repository is a full copy of this repository. The decision which of the copies is considered to be the central server repository is pure convention.

![Creating snapshots](https://www.vogella.com/tutorials/Git/img/sharedrepo10.png)

### [2. Introduction into Git](https://www.vogella.com/tutorials/Git/article.html#introduction-into-git)

The following description gives you a very high-level overview of the Git version control system.

#### [2.1. What is Git?](https://www.vogella.com/tutorials/Git/article.html#gitterminlogy)

_Git_ is the leading distributed version control system.

Git originates from the Linux kernel development and was founded in 2005 by Linus Torvalds. Nowadays it is used by many popular open source projects, e.g., Visual Studio Code from Microsoft, Android from Google or the Eclipse developer teams, as well as many commercial organizations.

The core of Git was originally written in the programming language _C_, but Git has also been re-implemented in other languages, e.g., Java, Ruby and Python.

#### [2.2. Git repositories and working trees](https://www.vogella.com/tutorials/Git/article.html#gitdefintion_localrepositories)

A Git repository manages a collection of files in a certain directory. A Git repository is file based, i.e., all versions of the managed files are stored on the file system.

A Git repository can be designed to be used on a server or for an user:

* _bare repositories_ are supposed to be used on a server for sharing changes coming from different developers. Such repositories do not allow the user to modify locally files and to create new versions for the repository based on these modifications.
* _non-bare repositories_ target the user. They allow you to create new changes through modification of files and to create new versions in the repository. This is the default type which is created if you do not specify any parameter during the clone operation.

A _local non-bare Git repository_ is typically called _local repository_.

Git allows the user to synchronize the local repository with other (remote) repositories.

Users with sufficient authorization can send new versions of their local repository to the remote repositories via the _push_ operation. They can also integrate changes from other repositories into their local repository via the _fetch_ and _pull_ operation.

Every local repository has a _working tree_. The files in the working tree may be new or based on a certain version from the repository. The user can change and create files or delete them.

After doing changes in the working tree, the user can capture new versions of the files in the Git repository. Or the user can restore files to a state already captured by Git.

#### [2.3. Adding a new version of the files to a Git repository](https://www.vogella.com/tutorials/Git/article.html#gitaddingprocess)

After modifying files in your _working tree_ you need to perform two steps to add them to your local repository.

* mark the desired file changes as relevant for the next commit; this operation is called `staging`
* instruct Git to create a new version of the managed files via the commit operation, the new created version is called _commit_.

This process is depicted in the following graphic.

![Git commit process](https://www.vogella.com/tutorials/Git/img/committingprocess10.png)

During the stage operation, copies of the specified files are added to a persisted storage called the _staging area_ (sometimes it is also called index). This allows you to do further modifications to the same file without including these modifications in the next commit. You can repeat the staging operation until you are satisfied and continue with the commit operation.

The _commit_ operation creates a new persistent snapshot called _commit object_ (short form: _commit_) of the managed files in the Git repository. A commit object, like all objects in Git, is immutable.

#### [2.4. Alternative versions of files with branches](https://www.vogella.com/tutorials/Git/article.html#gitdefinition_branching)

Git allows you to on different versions of your files in parallel. For this, Git uses _branches_. A branch allows the user to switch between these versions so that he can work on different changes independently from each other.

For example, if you want to develop a new feature, you can create a branch and make the changes in this branch. This does not affect the state of your files in other branches. For example, you can work independently on a branch called _production_ for bugfixes and on another branch called `feature_123` for implementing a new feature.

Branches in Git are local to the repository. A branch created in a local repository does not need to have a counterpart in a remote repository. Local branches can be compared with other local branches and with _remote-tracking_ branches. A remote-tracking branch proxies the state of a branch in another remote repository.

Git supports the combination of changes from different branches. The developer can use Git commands to combine the changes at a later point in time.

#### [2.5. Summary of the core Git terminology](https://www.vogella.com/tutorials/Git/article.html#summary-of-the-core-git-terminology)

The following table summarizes important _Git_ terminology. It is intended to be used as a reference, so you can skip this now and return to it if you need clarification.

Table 1. Git terminology

Term

Definition

Branch

A _branch_ is a named pointer to a commit. Selecting a branch in Git terminology is called _to checkout_ a branch. If you are working in a certain branch, the creation of a new commit advances this pointer to the newly created commit.

Each commit knows their parents (predecessors). Successors are retrieved by traversing the commit graph starting from branches or other refs, symbolic references (for example: HEAD) or explicit commit objects. This way a branch defines its own line of descendants in the overall version graph formed by all commits in the repository.

You can create a new branch from an existing one and change the code independently from other branches. One of the branches is the default (typically named _master_ ). The default branch is the one for which a local branch is automatically created when cloning the repository.

Commit

When you commit your changes into a repository this creates a new _commit object_ in the Git repository. This _commit object_ uniquely identifies a new revision of the content of the repository.

This revision can be retrieved later, for example, if you want to see the source code of an older version. Each commit object contains the author and the committer. This makes it possible to identify who did the change. The author and committer might be different people. The author did the change and the committer applied the change to the Git repository. This is common for contributions to open source projects.

HEAD

_HEAD_ is a symbolic reference most often pointing to the currently checked out branch.

Sometimes the _HEAD_ points directly to a commit object, this is called _detached HEAD mode_. In that state creation of a commit will not move any branch.

If you switch branches, the _HEAD_ pointer points to the branch pointer which in turn points to a commit. If you checkout a specific commit, the _HEAD_ points to this commit directly.

Index

_Index_ is an alternative term for the _staging area_.

Repository

A _repository_ contains the history, the different versions over time and all different branches and tags. In Git each copy of the repository is a complete repository. If the repository is not a bare repository, it allows you to checkout revisions into your working tree and to capture changes by creating new commits. Bare repositories are only changed by transporting changes from other repositories.

This description uses the term _repository_ to talk about a non-bare repository. If it talks about a bare repository, this is explicitly mentioned.

Revision

Represents a version of the source code. Git implements revisions as _commit objects_ (or short _commits_ ). These are identified by an SHA-1 hash.

Staging area

The _staging area_ is the place to store changes in the working tree before the commit. The _staging area_ contains a snapshot of the changes in the working tree (changed or new files) relevant to create the next commit and stores their mode (file type, executable bit).

Tag

A _tag_ points to a commit which uniquely identifies a version of the Git repository. With a tag, you can have a named point to which you can always revert to. You can revert to any point in a Git repository, but tags make it easier. The benefit of tags is to mark the repository for a specific reason, e.g., with a release.

Branches and tags are named pointers, the difference is that branches move when a new commit is created while tags always point to the same commit. Tags can have a timestamp and a message associated with them.

URL

A URL in Git determines the location of the repository. Git distinguishes between _fetchurl_ for getting new data from other repositories and _pushurl_ for pushing data to another repository.

Working tree

The _working tree_ contains the set of working files for the repository. You can modify the content and commit the changes as new commits to the repository.

Performing Git operations can be done via the command line or via multiple user interface tools.

#### [3.1. The Git command line tooling](https://www.vogella.com/tutorials/Git/article.html#git_tools_commmandline)

The most common tooling for Git is provided as command line tooling via the `git` command. The examples in this tutorial use the Git command line tooling.

Without any arguments, this command lists its options and the most common commands. You can get help for a certain Git command via the help command online option followed by the command.

```
git help [command to get help for]
```

See all possible commands, use the `git help --all` command.

Git supports for several commands a short and a long version, similar to other Unix commands. The short version uses a single hyphen and the long version uses two hyphen. The following two commands are equivalent.

```
git commit -m "This is a message"

git commit --message "This is a message"
```

The double hyphens (--) in Git separates out any references or other options from a path (usually file names). For example, HEAD points to the active commit.\
Using double hyphens allows you to distinguish between looking at a file called HEAD from a Git commit reference called HEAD.

In case Git can determine the correct parameters and options automatically the double hyphens can be avoided.

```
# seeing the git log for the HEAD file
git log -- HEAD

# seeing the git log for the HEAD reference
git log HEAD --

# if there is no HEAD file you can use HEAD as commit reference
git log HEAD
```

#### [3.4. Other graphical tools](https://www.vogella.com/tutorials/Git/article.html#other-graphical-tools)

You can also use graphical tools.

See [GUI Clients](http://git-scm.com/downloads/guis) for an overview of other available tools. Graphical tools like Netbeans or IntelliJ provide also integrated Git tooling but are not covered in this description.

### [5. Git configuration](https://www.vogella.com/tutorials/Git/article.html#setup)

#### [5.1. Git configuration levels](https://www.vogella.com/tutorials/Git/article.html#setup_configurationlevels)

The `git config` command allows you to configure your Git settings. These settings can be system wide, user or repository specific.

A more specific setting overwrites values in the previous level. A setting for the repository overrides the user setting and a user setting overrides a system wide setting.

[**5.1.1. Git system-wide configuration**](https://www.vogella.com/tutorials/Git/article.html#setup_systemwideconfiguration)

You can provide a system wide configuration for your Git settings. A system wide configuration is not very common. Most settings are user specific or repository specific as described in the next chapters.

On a Unix based system, Git uses the `/etc/gitconfig` file for this system-wide configuration. To set this up, ensure you have sufficient rights, i.e. root rights, in your OS and use the `--system` option for the `git config` command.

[**5.1.2. Git user configuration**](https://www.vogella.com/tutorials/Git/article.html#setup_userconfiguration)

Git allows you to store user settings in the `.gitconfig` file located in the user home directory. This is also called the _global_ Git configuration.

For example Git stores the committer and author of a change in each commit. This and additional information can be stored in the Git user settings.

In each Git repository you can also configure the settings for this repository. User configuration is done if you include the `--global` option in the `git config` command.

[**5.1.3. Repository specific configuration**](https://www.vogella.com/tutorials/Git/article.html#setup_configuration)

You can also store repository specific settings in the `.git/config` file of a repository. Use the `--local` or use no flag at all. If neither the `--system` not the `--global` parameter is used, the setting is specific for the current Git repository.

#### [5.2. User credential configuration](https://www.vogella.com/tutorials/Git/article.html#gitsetup_user)

You have to configure at least your user and email address to be able to commit to a Git repository because this information is stored in each commit.

```
# configure the user which will be used by Git
# this should be not an acronym but your full name
git config --global user.name "Firstname Lastname"

# configure the email address
git config --global user.email "your.email@example.org"
```

#### [5.3. Push configuration](https://www.vogella.com/tutorials/Git/article.html#gitsetup_pushconfiguration)

If your are using Git in a version below 2.0 you should also execute the following command.

```
# set default so that only the current branch is pushed
git config --global push.default simple
```

This configures Git so that the `git push` command pushes only the active branch to your Git remote repository. As of Git version 2.0 this is the default and therefore it is good practice to configure this behavior.

#### 5.4. Always rebase during pull

By default, Git runs the `git fetch` followed by the `git merge` command if you use the `git pull` command. You can configure git to use `git rebase` instead of `git merge` for the pull command via the following setting.

```
# use rebase during pull instead of merge
git config --global pull.rebase true
```

This setting helps avoiding merge commits during the pull operation which synchronizes your Git repository with a remote repository. The author of this description always uses this setting for his Git repositories.

#### [5.5. Allow rebasing with uncommited changes](https://www.vogella.com/tutorials/Git/article.html#allow-rebasing-with-uncommited-changes)

If you want Git to automatically save your uncommited changes before a rebase you can activate autoStash. After the rebase is done your changes will get reapplied. For an explanation of `git stash` please see [Stashing changes in Git](https://www.vogella.com/tutorials/Git/article.html#stash_usage).

```
git config --global rebase.autoStash true
```

Before Git v2.6 `git pull --rebase` didn't respected this setting.

#### [5.6. Color Highlighting](https://www.vogella.com/tutorials/Git/article.html#setup_highlighting)

The following commands enables color highlighting for Git in the console.

```
git config --global color.ui auto
```

#### [5.7. Setting the default editor](https://www.vogella.com/tutorials/Git/article.html#setup_editor)

By default Git uses the system default editor which is taken from the _VISUAL_ or _EDITOR_ environment variables if set. You can configure a different one via the following setting.

```
# setup vim as default editor for Git (Linux)
git config --global core.editor vim
```

#### [5.8. Setting the default merge tool](https://www.vogella.com/tutorials/Git/article.html#setup_mergetool)

File conflicts might occur in Git during an operation which combines different versions of the same files. In this case the user can directly edit the file to resolve the conflict.

Git allows also to configure a merge tool for solving these conflicts. You have to use third party visual merge tools like tortoisemerge, p4merge, kdiff3 etc. A Google search for these tools help you to install them on your platform. Keep in mind that such tools are not required, you can always edit the files directly in a text editor.

Once you have installed them you can set your selected tool as default merge tool with the following command.

```
# setup kdiff3 as default merge tool (Linux)
git config --global merge.tool kdiff3

# to install it under Ubuntu use
sudo apt-get install kdiff3
```

#### [5.10. Query Git settings](https://www.vogella.com/tutorials/Git/article.html#setup_seesettings)

To query your Git settings, execute the following command:

If you want to query the global settings you can use the following command.

```
git config --global --list
```

### [6. Configure files and directories to ignore](https://www.vogella.com/tutorials/Git/article.html#configure-files-and-directories-to-ignore)

#### [6.1. Ignoring files and directories with a .gitignore file](https://www.vogella.com/tutorials/Git/article.html#ignoring-files-and-directories-with-a-.gitignore-file)

Git can be configured to ignore certain files and directories for repository operations. This is configured via one or several `.gitignore` files. Typically, this file is located at the root of your Git repository but it can also be located in sub-directories. In the second case the defined rules are only valid for the sub-directory and below.

You can use certain wildcards in this file. `*` matches several characters. More patterns are possible and described under the following URL: [gitignore manpage](https://www.kernel.org/pub/software/scm/git/docs/gitignore.html)

For example, the following `.gitignore` file tells Git to ignore the `bin` and `target` directories and all files ending with a \~.

```
# ignore all bin directories
# matches "bin" in any subfolder
bin/

# ignore all target directories
target/

# ignore all files ending with ~
*~
```

You can create the `.gitignore` file in the root directory of the working tree to make it specific for the Git repository.

The `.gitignore` file tells Git to ignore the specified files in Git commands. You can still add ignored files to the _staging area_ of the Git repository by using the `--force` parameter, i.e. with the `git add --force [paths]` command.

This is useful if you want to add, for example, auto-generated binaries, but you need to have a fine control about the version which is added and want to exclude them from the normal workflow.

It is good practice to commit the local `.gitignore` file into the Git repository so that everyone who clones this repository have it.

#### [6.2. Stop tracking files based on the .gitignore file](https://www.vogella.com/tutorials/Git/article.html#gitignore_untrack)

Files that are tracked by Git are not automatically removed if you add them to a `.gitignore` file. Git never ignores files which are already tracked, so changes in the `.gitignore` file only affect new files. If you want to ignore files which are already tracked you need to explicitly remove them.

The following command demonstrates how to remove the `.metadata` directory and the `doNotTrackFile.txt` file from being tracked. This is example code, as you did not commit the corresponding files in your example, the command will not work in your Git repository.

```
# remove directory .metadata from git repo
git rm -r --cached .metadata
# remove file test.txt from repo
git rm --cached doNotTrackFile.txt
```

Adding a file to the `.gitignore` file does not remove the file from the repository history. If the file should also be removed from the history, have a look at the `git filter-branch` command which allows you to rewrite the commit history. See [Using the git filter branch command (filter-branch)](https://www.vogella.com/tutorials/Git/article.html#filterbranch_definition) for details.

#### [6.3. Global (cross-repository) .gitignore settings](https://www.vogella.com/tutorials/Git/article.html#global-cross-repository-gitignore-settings)

You can also setup a global `.gitignore` file valid for all Git repositories via the `core.excludesfile` setting. The setup of this setting is demonstrated in the following code snippet.

```
# Create a ~/.gitignore in your user directory
cd ~/
touch .gitignore

# Exclude bin and .metadata directories
echo "bin" >> .gitignore
echo ".metadata" >> .gitignore
echo "*~" >> .gitignore
echo "target/" >> .gitignore
# for Mac
echo ".DS_Store" >> .gitignore
echo "._*" >> .gitignore

# Configure Git to use this file
# as global .gitignore

git config --global core.excludesfile ~/.gitignore
```

The global `.gitignore` file is only locally available.

#### [6.4. Local per-repository ignore rules](https://www.vogella.com/tutorials/Git/article.html#local-per-repository-ignore-rules)

You can also create local per-repository rules by editing the `.git/info/exclude` file in your repository. These rules are not committed with the repository so they are not shared with others.

This allows you to exclude, for example, locally generated files.

#### [6.5. Tracking empty directories with Git](https://www.vogella.com/tutorials/Git/article.html#tracking_empty_directories)

Git ignores empty directories, i.e., it does not put them under version control. If you want to track an empty directory in your Git repository, it is a good practice to put a file called `.gitignore` in the directory. As the directory now contains a file, Git includes it into its version control mechanism.

The file could be called anything. Some people suggest to call the file `.gitkeep`. One problem with this approach is that `.gitkeep` is unlikely to be ignored by build systems. This may result in the `.gitkeep` file being copied to the output repository, which is typically not desired.

### [7. Configuration for Git usage via the command line](https://www.vogella.com/tutorials/Git/article.html#exercise_gitsetup)

To use Git you can to configure your user name and the email for Git usage.

Configure your user and email for Git via the following command.

```
# configure the user which will be used by Git
# this should be not an acronym but your full name
git config --global user.name "Firstname Lastname"

# configure the email address
git config --global user.email "your.email@example.org"
```

Another commmon setting is to configure Git to use _rebase_ during the pull operation.

```
# configure new branches to use fetch and rebase during the pull operation
git config --global branch.autosetuprebase always

# always use fetch and rebase during pull
git config --global pull.rebase true
```

If you don't know at this point what the rebase operation or pull operation is, it is fine to leave out these settings, you can still later change these. This description assumes that you set them.

### [8. Performing a local Git workflow via the command line](https://www.vogella.com/tutorials/Git/article.html#performing-a-local-git-workflow-via-the-command-line)

In this exercise, you learn how to use the Git command line to work with Git. To ensure that you have a repository available, you start by creating a local Git repository via the command line.

Open a command shell for the operations. Some commands are Linux specific, e.g., appending to a file or creating a directory. Substitute these commands with the commands of your operating system. The comments (marked with #) before the commands explain the specific actions.

#### [8.1. Create a directory](https://www.vogella.com/tutorials/Git/article.html#firstgit_directory)

The following commands create an empty directory which is used later in this exercise to contain the working tree and the Git repository.

```
# switch to the home directory
cd

# create a directory and switch into it
mkdir repo01
cd repo01

# create a new directory
mkdir datafiles
```

#### [8.2. Create a new Git repository](https://www.vogella.com/tutorials/Git/article.html#firstgit_repository_creation)

You now create a new local repository. Use the `git init` command to create a Git repository in the current directory. Git does not care whether you start with an empty directory or if it contains already files.

```
# initialize the Git repository for the current directory
# should be repo01
git init
```

All files inside the repository folder, excluding the `.git` folder, are the _working tree_.

#### [8.3. Create new content](https://www.vogella.com/tutorials/Git/article.html#firstgit_content)

Create a few new files in your directory. For example, the following commands create a few files in a bash shell.

```
# ensure that you are in your Git Git repository

# create an empty file in a new directory
touch datafiles/data.txt

# create a few files with content
ls > test01
echo "bar" > test02
echo "foo" > test03
```

#### [8.4. See the current status of your repository](https://www.vogella.com/tutorials/Git/article.html#firstgit_repostatus)

View the status of your repository via the following command.

The output looks similar to the following listing.

```
On branch master

Initial commit

Untracked files:
  (use "git add <file>..." to include in what will be committed)

    datafiles/
    test01
    test02
    test03

nothing added to commit but untracked files present (use "git add" to track)
```

#### [8.5. Add changes to the staging area](https://www.vogella.com/tutorials/Git/article.html#firstgit_repoadd)

Inform git that all new files should be added to the Git repository with the `git stage` command.

```
# add all files to the index of the Git repository
git stage .
# if stage is not available use git add instead, stage was added around 2020 to the git command line
```

Afterwards run the `git status` command again to see the current status. The following listing shows the output of this command.

```
On branch master

No commits yet

Changes to be committed:
  (use "git rm --cached <file>..." to unstage)
    new file:   datafiles/data.txt
    new file:   test01
    new file:   test02
    new file:   test03
```

#### [8.6. Change files that are staged](https://www.vogella.com/tutorials/Git/article.html#firstgit_changefiles)

Adjust an existing file.

```
# append a string to the test03 file
echo "foo2" >> test03
```

Validate that the new changes are not yet staged.

```
On branch master

No commits yet

Changes to be committed:
  (use "git rm --cached <file>..." to unstage)

    new file:   datafiles/data.txt
    new file:   test01
    new file:   test02
    new file:   test03

Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)

    modified:   test03
```

Add the new changes to the staging area.

```
# add all files to the index of the Git repository
git stage .
```

Use the `git status` command again to see that all changes are staged.

```
On branch master

No commits yet

Changes to be committed:
  (use "git rm --cached <file>..." to unstage)

    new file:   datafiles/data.txt
    new file:   test01
    new file:   test02
    new file:   test03
```

#### [8.7. Commit staged changes to the repository](https://www.vogella.com/tutorials/Git/article.html#firstgit_repocommit)

Commit the staged changes to your Git repository.

```
# commit your file to the local repository
git commit -m "Initial commit"
```

Git also offers a mode that lets you choose interactively which changes you want to commit. After you quit the mode you will be asked to provide a commit message in your $EDITOR.

#### [8.8. Viewing the commit history](https://www.vogella.com/tutorials/Git/article.html#viewing-the-commit-history)

The commit operation, created a new version of your files in the local repository inside the `.git` folder. Run the `git log` command to see the history.

```
# show the Git log for the change
git log
```

You see an output similar to the following.

```
commit dbbd83bffddb8b9129f37912338011bb82927d0e (HEAD -> master)
Author: Lars Vogel <Lars.Vogel@vogella.com>
Date:   Mon Feb 8 21:53:12 2021 +0100

    Initial commit
```

#### [8.9. Viewing the changes of a commit](https://www.vogella.com/tutorials/Git/article.html#viewing-the-changes-of-a-commit)

Use the `git show` command to see the changes of a commit. If you specify a commit reference as third parameter, this is used to determine the changes, otherwise the _HEAD_ reference is used.

#### [8.11. Remove files](https://www.vogella.com/tutorials/Git/article.html#firstgit_deletefile)

Delete a file. Stage the deletion for the next commit with the `git stage .` command.

```
# remove the "test03" file
rm test03
# add and commit the removal
git stage .
git commit -m "Removes the test03 file"
```

Alternatively you can use the `git rm` command to delete the file from your working tree and record the deletion of the file in the staging area.

#### [8.12. Revert changes in files in the working tree](https://www.vogella.com/tutorials/Git/article.html#firstgit_checkout)

Use the `git reset` command (or `git checkout` in older Git command line tools) to reset a tracked file (a file that was once staged or committed) to its latest staged or commit state.

Restore the delete file by checking out the last version before the current commit (HEAD\~1).

```
git reset HEAD~1 -- test03
git restore test03
```

Checkout the status and commit the file again.

```
git status
git commit -m "Adding test03 back"
```

You can also replace the content of a file with its last stage version or the version from a certain commit.

In the following example, you reset some changes in your working tree.

```
echo "useless data" >> test02
echo "another unwanted file" >> unwantedfile.txt

# see the status
git status

# remove unwanted changes from the working tree
# CAREFUL this deletes the local changes in the tracked file
git reset test02

# unwantedstaged.txt is not tracked by Git simply delete it
rm unwantedfile.txt
```

If you use `git status` command to see that there are no changes left in the working directory.

```
On branch master
nothing to commit, working directory clean
```

Use this command carefully. The `git reset` command deletes the changes of tracked files (file known to Git) in the working tree and it is not possible to restore this deletion via Git.

#### [8.13. Correct the changes of the commit with git amend](https://www.vogella.com/tutorials/Git/article.html#firstgit_amend)

The `git commit --amend` command makes it possible to rework the changes of the last commit. It creates a new commit with the adjusted changes.

The amended commit is still available until a clean-up job removes it. But it is not included in the `git log` output hence it does not distract the user.

Assume the last commit message was incorrect as it contained a typo. The following command corrects this via the `--amend` parameter.

```
# assuming you have something to commit
git commit -m "message with a tpyo here"
```

```
# amend the last commit
git commit --amend -m "More changes - now correct"
```

You should use the `git --amend` command only for commits which have not been pushed to a public branch of another Git repository. The `git --amend` command creates a new commit ID and people may have based their work already on the existing commit. If that would be the case, they would need to migrate their work based on the new commit.

#### [8.14. Ignore files and directories with the .gitignore file](https://www.vogella.com/tutorials/Git/article.html#usegitignore)

Create the following `.gitignore` file in the root of your Git directory to ignore the specified directory and file.

```
cd ~/repo01
touch .gitignore
echo ".metadata/" >> .gitignore
echo "doNotTrackFile.txt" >> .gitignore
```

The above command creates the file via the command line. A more common approach is to use your favorite text editor to create the file. This editor must save the file as plain text. Editors which do this are for example _gedit_ under Ubuntu or _Notepad_ under Windows.

The resulting file looks like the following listing.

```
.metadata/
doNotTrackFile.txt
```

#### [8.15. Commit the .gitignore file](https://www.vogella.com/tutorials/Git/article.html#commitgitignore)

It is good practice to commit the `.gitignore` file into the Git repository. Use the following commands for this.

```
# add the .gitignore file to the staging area
git stage .gitignore
# commit the change
git commit -m "Adds .gitignore file"
```

### [9. Remote repositories](https://www.vogella.com/tutorials/Git/article.html#remotes)

#### [9.1. What are remotes?](https://www.vogella.com/tutorials/Git/article.html#remotes_definition)

Git allows that you can synchronize your repository with more than one remote repository.

In the local repository you can address each remote repository by a shortcut. This shortcut is simply called _remote_. Such a _remote_ repository point to another remote repository that can hosted on the Internet, locally or on the network.

You can specify properties for the remove, e.g. URL, branches to fetch or branches to push.

Think of _remotes_ as shorter bookmarks for repositories. You can always connect to a remote repository if you know its URL and if you have access to it. Without _remotes_ the user would have to type the URL for each and every command which communicates with another repository.

It is possible that users connect their individual repositories directly, but a typically Git workflow involves one or more remote repositories which are used to synchronize the individual repository. Typically the remote repository which is used for synchronization is located on a server which is always available.

![Remote Git repositories](https://www.vogella.com/tutorials/Git/img/git_remoterepo10.png)

A remote repository can also be hosted in the local file system.

#### [9.2. Bare repositories](https://www.vogella.com/tutorials/Git/article.html#bareremotes_definition)

A remote repository on a server typically does not require a _working tree_. A Git repository without a _working tree_ is called a _bare repository_. You can create such a repository with the `--bare` option. The command to create a new empty bare remote repository is displayed below.

```
# create a bare repository
git init --bare
```

By convention the name of a bare repository should end with the `.git` extension.

To create a bare Git repository in the Internet you would, for example, connect to your server via the SSH protocol or you use some Git hosting platform, e.g., GitHub.com.

#### [9.3. Convert a Git repository to a bare repository](https://www.vogella.com/tutorials/Git/article.html#bareremotes_convert)

Converting a normal Git repository to a bare repository is not directly support by Git.

You can convert it manually by moving the content of the `.git` folder into the root of the repository and by removing all others files from the working tree. Afterwards you need to update the Git repository configuration with the `git config core.bare true` command.

As this is officially not supported, you should prefer cloning a repository with the `--bare` option.

#### [9.4. Cloning a repository](https://www.vogella.com/tutorials/Git/article.html#remotes_cloneoperation)

The `git clone` command copies an existing Git repository. This copy is a working Git repository with the complete history of the cloned repository. It can be used completely isolated from the original repository.

Git supports several transport protocols to connect to other Git repositories; the native protocol for Git is also called `git`.

The following command clones an existing repository using the Git protocol. The Git protocol uses the port 9148 which might be blocked by firewalls.

```
# switch to a new directory
mkdir ~/online
cd ~/online

# clone online repository
git clone git://github.com/vogella/gitbook.git
```

If you have SSH access to a Git repository, you can also use the `ssh` protocol. The name preceding @ is the user name used for the SSH connection.

```
# clone online repository
git clone ssh://git@github.com/vogella/gitbook.git

# older syntax
git clone git@github.com:vogella/gitbook.git
```

Alternatively you could clone the same repository via the `http` protocol.

```
# the following will clone via HTTP
git clone http://github.com/vogella/gitbook.git
```

#### [9.5. Adding remote repositories](https://www.vogella.com/tutorials/Git/article.html#remote_add)

If you clone a repository, Git implicitly creates a _remote_ named _origin_ by default. The _origin_ _remote_ links back to the cloned repository.

You can push changes to this repository via `git push` as Git uses `origin` as default. Of course, pushing to a remote repository requires write access to this repository.

You can add more _remotes_ via the `git remote add [name] [URL_to_Git_repo]` command. For example, if you cloned the repository from above via the Git protocol, you could add a new remote with the name _github\_http_ for the http protocol via the following command.

```
# add the HTTPS protocol
git remote add github_http https://vogella@github.com/vogella/gitbook.git
```

#### [9.6. Rename remote repositories](https://www.vogella.com/tutorials/Git/article.html#remote_rename)

To rename an existing remote repository use the `git remote rename` command. This is demonstrated by the following listing.

```
# rename the existing remote repository from
# github_http to github_testing
git remote rename github_http github_testing
```

If you create a Git repository from scratch with the `git init` command, the _origin_ remote is not created automatically.

#### [9.7. Remote operations via HTTP](https://www.vogella.com/tutorials/Git/article.html#remote_httpprotocol)

HTTP as Git protocol proxy support in Git It is possible to use the HTTP protocol to clone Git repositories. This is especially helpful if your firewall blocks everything except HTTP or HTTPS.

```
git clone http://git.eclipse.org/gitroot/platform/eclipse.platform.ui.git
```

For secured SSL encrypted communication you should use the SSH or HTTPS protocol in order to guarantee security.

#### [9.8. Using a proxy](https://www.vogella.com/tutorials/Git/article.html#remote_httpproxy)

Git also provides support for HTTP access via a proxy server. The following Git command could, for example, clone a repository via HTTP and a proxy. You can either set the proxy variable in general for all applications or set it only for Git.

The following listing configures the proxy via environment variables.

```
# Linux and Mac
export http_proxy=http://proxy:8080
export https_proxy=https://proxy:8443

# Windows
set http_proxy http://proxy:8080
set https_proxy http://proxy:8080

git clone http://git.eclipse.org/gitroot/platform/eclipse.platform.ui.git
```

The following listing configures the proxy via Git config settings.

```
# set proxy for git globally
git config --global http.proxy http://proxy:8080
# to check the proxy settings
git config --get http.proxy
# just in case you need to you can also revoke the proxy settings
git config --global --unset http.proxy
```

Git is able to store different proxy configurations for different domains, see `core.gitProxy` in [Git config manpage](http://git-scm.com/docs/git-config).

#### [9.9. Adding a remote repository](https://www.vogella.com/tutorials/Git/article.html#adding-a-remote-repository)

You add as many _remotes_ to your repository as desired. For this you use the `git remote add` command.

You created a new Git repository from scratch earlier. Use the following command to add a remote to your new bare repository using the _origin_ name.

```
# add ../remote-repository.git with the name origin
git remote add origin ../remote-repository.git
```

#### [9.10. Synchronizing with remote repositories](https://www.vogella.com/tutorials/Git/article.html#remotes_remote_synchronize)

You can synchronize your local Git repository with remote repositories. These commands are covered in detail in later sections but the following command demonstrates how you can send changes to your remote repository.

```
# do some changes
echo "I added a remote repo" > test02

# commit
git commit -a -m "This is a test for the new remote origin"

# to push use the command:
# git push [target]
# default for [target] is origin
git push origin
```

#### [9.11. Show the existing remotes](https://www.vogella.com/tutorials/Git/article.html#remotes_showremote)

To see the existing definitions of the remote repositories, use the following command.

```
# show the details of the remote repo called origin
git remote show origin
```

To see the details of the _remotes_, e.g., the URL use the following command.

```
# show the existing defined remotes
git remote

# show details about the remotes
git remote -v
```

#### [9.12. Push changes to another repository](https://www.vogella.com/tutorials/Git/article.html#cloneremotes_push)

The `git push` command allows you to send data to other repositories. By default it sends data from your current branch to the same branch of the remote repository.

By default you can only push to bare repositories (repositories without working tree). You can aslo only push a change to a remote repository which results in a fast-forward merge.

#### [9.13. Pull changes from a remote repository](https://www.vogella.com/tutorials/Git/article.html#cloneremotes_pull)

The `git pull` command allows you to get the latest changes from another repository for the current branch.

The `git pull` command is actually a shortcut for `git fetch` followed by the `git merge` or the `git rebase` command depending on your configuration. You configured your Git repository so that `git pull` is a fetch followed by a rebase.

### [10. Exercise: Working with a (local) remote repository](https://www.vogella.com/tutorials/Git/article.html#exercise_workingwithremotes)

You now create a local bare repository based on your existing Git repository. In order to simplify the examples, the Git repository is hosted locally in the filesystem and not on a server in the Internet.

Afterwards you pull from and push to your bare repository to synchronize changes between your repositories.

#### [10.1. Create a bare Git repository via the clone operation](https://www.vogella.com/tutorials/Git/article.html#remotes_setupexercise)

Execute the following commands to create a bare repository based on your existing Git repository.

```
# switch to the first repository
cd ~/repo01

# create a new bare repository by cloning the first one
git clone --bare . ../remote-repository.git

# check the content of the git repo, it is similar
# to the .git directory in repo01
# files might be packed in the bare repository

ls ~/remote-repository.git
```

#### [10.2. Exercise: Clone your bare repository](https://www.vogella.com/tutorials/Git/article.html#remotes_remoteadd)

Clone your bare repository and checkout a working tree in a new directory via the following commands.

```
# switch to home
cd ~
# make new directory
mkdir repo02

# switch to new directory
cd ~/repo02
# clone
git clone ../remote-repository.git .
```

#### [10.3. Exercise: Using the push command](https://www.vogella.com/tutorials/Git/article.html#exercise_cloneremotes_push)

Make some changes in one of your non-bare local repositories and push them to your bare repository via the following commands.

```
# make some changes in the first repository
cd ~/repo01

# make some changes in the file
echo "Hello, hello. Turn your radio on" > test01
echo "Bye, bye. Turn your radio off" > test02

# commit the changes, -a will commit changes for modified files
# but will not add automatically new files
git commit -a -m "Some changes"

# push the changes
git push ../remote-repository.git
```

#### [10.4. Exercise: Using the pull command](https://www.vogella.com/tutorials/Git/article.html#exercise_cloneremotes_pull)

To test the `git pull` in your example Git repositories, switch to other non-bare local repository. Pull in the recent changes from the remote repository. Afterwards make some changes and push them again to your remote repository.

```
# switch to second directory
cd ~/repo02

# pull in the latest changes of your remote repository
git pull

# make changes
echo "A change" > test01

# commit the changes
git commit -a -m "A change"

# push changes to remote repository
# origin is automatically created as we cloned original from this repository
git push origin
```

You can pull in the changes in your first example repository with the following commands.

```
# switch to the first repository and pull in the changes
cd ~/repo01

git pull ../remote-repository.git/

# check the changes
git status
```

### [11. Using Branches](https://www.vogella.com/tutorials/Git/article.html#using-branches)

#### [11.1. What are branches?](https://www.vogella.com/tutorials/Git/article.html#gitbranch_def)

Git allows you to create _branches_, i.e. named pointers to commits. You can work on different branches independently from each other. The default branch is most often called _master_.

A branch pointer in Git is 41 bytes large, 40 bytes of characters and an additional new line character. Therefore, the creating of branches in Git is very fast and cheap in terms of resource consumption. Git encourages the usage of branches on a regular basis.

If you decide to work on a branch, you _checkout_ this branch. This means that Git populates the _working tree_ with the version of the files from the commit to which the branch points and moves the _HEAD_ pointer to the new branch.

_HEAD_ is a symbolic reference usually pointing to the branch which is currently checked out.

#### [11.2. List available branches](https://www.vogella.com/tutorials/Git/article.html#gitbranch_listbranches)

The `git branch` command lists all local branches. The currently active branch is marked with `*`.

```
# lists available branches
git branch
```

If you want to see all branches (including remote-tracking branches), use the `-a` for the `git branch` command.

```
# lists all branches including the remote branches
git branch -a
```

The `-v` option lists more information about the branches.

In order to list branches in a remote repository use the `git branch -r` command as demonstrated in the following example.

```
# lists branches in the remote repositories
git branch -r
```

#### [11.3. Create new branch](https://www.vogella.com/tutorials/Git/article.html#gitbranch_createnewbranch)

You can create a new branch via the `git branch [newname]` command. This command allows to specify the commit (commit id, tag, remote or local branch) to which the branch pointer original points. If not specified, the commit to which the HEAD reference points is used to create the new branch.

```
# syntax: git branch <name> <hash>
# <hash> in the above is optional
git branch testing
```

#### [11.4. Checkout branch](https://www.vogella.com/tutorials/Git/article.html#gitbranch_checkout)

To start working in a branch you have to _checkout_ the branch. If you _checkout_ a branch, the HEAD pointer moves to the last commit in this branch and the files in the working tree are set to the state of this commit.

The following commands demonstrate how you switch to the branch called _testing_, perform some changes in this branch and switch back to the branch called _master_.

```
# switch to your new branch
git checkout testing

# do some changes
echo "Cool new feature in this branch" > test01
git commit -a -m "new feature"

# switch to the master branch
git checkout master

# check that the content of
# the test01 file is the old one
cat test01
```

To create a branch and to switch to it at the same time you can use the `git checkout` command with the `-b` parameter.

```
# create branch and switch to it
git checkout -b bugreport12

# creates a new branch based on the master branch
# without the last commit
git checkout -b mybranch master~1
```

#### [11.5. Rename a branch](https://www.vogella.com/tutorials/Git/article.html#git_rename_branch)

Renaming a branch can be done with the following command.

```
# rename branch
git branch -m [old_name] [new_name]
```

#### [11.6. Delete a branch](https://www.vogella.com/tutorials/Git/article.html#gitdeletebrach)

To delete a branch which is not needed anymore, you can use the following command. You may get an error message that there are uncommited changes if you did the previous examples step by step. Use force delete (uppercase `-D`) to delete it anyway.

```
# delete branch testing
git branch -d testing
# force delete testing
git branch -D testing
# check if branch has been deleted
git branch
```

#### [11.7. Push changes of a branch to a remote repository](https://www.vogella.com/tutorials/Git/article.html#gitpushbranch)

You can push the changes in a branch to a remote repository by specifying the target branch. This creates the target branch in the remote repository if it does not yet exist.

If you do not specify the remote repository, the `origin` is used as default

```
# push current branch to a branch called "testing" to remote repository
git push origin testing

# switch to the testing branch
git checkout testing

# some changes
echo "News for you" > test01
git commit -a -m "new feature in branch"

# push current HEAD to origin
git push

# make new branch
git branch anewbranch
# some changes
echo "More news for you" >> test01
git commit -a -m "a new commit in a feature branch"
# push anewbranch to the master in the origin
git push origin anewbranch:master

# get the changes into your local master
git checkout master
git pull
```

This way you can decide which branches you want to push to other repositories and which should be local branches.

#### [11.8. Switching branches with untracked files](https://www.vogella.com/tutorials/Git/article.html#gitbranch_untrackedfiles)

Untracked files (never added to the staging area) are unrelated to any branch. They exist only in the working tree and are ignored by Git until they are committed to the Git repository. This allows you to create a branch for unstaged and uncommitted changes at any point in time.

#### [11.9. Switching branches with uncommitted changes](https://www.vogella.com/tutorials/Git/article.html#gitbranch_dirtyfiles)

Similar to untracked files you can switch branches with unstaged or staged modifications which are not yet committed.

You can switch branches if the modifications do not conflict with the files from the branch.

If Git needs to modify a changed file during the checkout of a branch, the checkout fails with a `checkout conflict` error. This avoids that you lose changes in your files.

In this case the changes must be committed, reverted or stashed. You can also always create a new branch based on the current HEAD.

#### [11.10. Differences between branches](https://www.vogella.com/tutorials/Git/article.html#gitdiffbranches)

To see the difference between two branches you can use the following command.

```
# shows the differences between
# current head of master and your_branch

git diff master your_branch
```

You can use commit ranges. For example, if you compare a branch called _your\_branch_ with the _master_ branch the following command shows the changes in _your\_branch_ and _master_ since these branches diverged.

```
# shows the differences in your
# branch based on the common
# ancestor for both branches

git diff master...your_branch
```

Git has the option to add additional metadata to commits. This can be used to document for example a commit which is used to perform a software release.

This is done via _tags_.

Git supports two different types of tags, lightweight and annotated tags.

A _lightweight tag_ is a named pointer to a commit, without any additional information about the tag. An _annotated tag_ contains additional meta data:

* the name and email of the person who created the tag
* tagging message similar to a commit message
* the date of the tagging

Annotated tags can also be signed and verified with _GNU Privacy Guard (GPG)_.

You can list the available tags via the following command:

```
git tag

# Shows all tags with the commits they point to
git show-ref --tags --abbrev
```

Creating lightweight tags

To create a lightweight tag don't use the `-m`, `-a` or `-s` option.

Lightweight tags in Git are sometimes used to identify the input for a build.

```
# create lightweight tag
git tag 1.7.1
```

To see the commit the tag points to, you can use:

You could also use the following command (and define a alias for that):

```
git tag --list --format '%(refname:short) %(objectname:short)'
```

You can create a new annotated tag via the `git tag -a` or the `git tag -m "message` command. To specify the tag message, use the `-m` parameter. The following command tags the commit to which the current active HEAD points.

```
# create tag
git tag 1.6.1 -m 'Release 1.6.1'

# show the tag
git show 1.6.1
```

You can also create tags for a certain commit id.

```
git tag 1.5.1 -m 'version 1.5' [commit id]
```

#### [13.1. Creating signed tags](https://www.vogella.com/tutorials/Git/article.html#tagging_signedtags)

You can use the option `-s` to create a signed tag. These tags are signed with _GNU Privacy Guard (GPG)_ and can also be verified with GPG. For details on this please see the following URL: [Git tag manpage](https://www.kernel.org/pub/software/scm/git/docs/git-tag.html).

#### [13.2. Checkout tags](https://www.vogella.com/tutorials/Git/article.html#tagging_checkout)

If you want to use the code associated with the tag, use:

If you checkout a tag, you are in the _detached head mode_ and commits created in this mode are harder to find after you checkout a branch again.

#### [13.3. Push tags](https://www.vogella.com/tutorials/Git/article.html#tagging_pushtags)

By default the `git push` command does not transfer tags to remote repositories. You explicitly have to push the tag with the following command.

```
# push a tag or branch called tagname
git push origin [tagname]

# to explicitly push a tag and not a branch
git push origin tag <tagname>

# push all tags
git push --tags
```

#### [13.4. Delete tags](https://www.vogella.com/tutorials/Git/article.html#tagging_delete)

You can delete tags with the `-d` parameter. This deletes the tag from your local repository. By default Git does not push tag deletions to a remote repository, you have to trigger that explicitly.

The following commands demonstrate how to push a tag deletion.

```
# delete tag locally
git tag -d 1.7.0

# delete tag in remote repository
# called origin
git push origin :refs/tags/1.7.0
```

#### [13.6. Using tags for software releases](https://www.vogella.com/tutorials/Git/article.html#tagging_releases)

Tags are frequently used to tag a software release. In this case, they are called _release tags_.

Convention is that release tags are labeled based on the \[major].\[minor].\[patch] naming scheme. These release tags follow the semantic versioning of the software release.

* the _patch_ version is incremented if (only) backwards compatible bug fixes are introduced
* the _minor_ version is incremented if backwards compatible functionality of the user of the public API are introduced
* the _major_ version is incremented if incompatible changes are introduced in the public API

For example "1.0.0" or "v1.0.0".

If software build tools like Maven or Gradle are used, the released version should also follow the semantic versioning. In this case the tag is typically the same as the release version.

#### [13.7. Creating of a release log based on tags](https://www.vogella.com/tutorials/Git/article.html#creating-of-a-release-log-based-on-tags)

Git allows to list the commits between any reference; this includes tags.

This allows to create a release log, for example via the following commands.

```
# show log between two tags
git log tag1..tag1

# show shortlog between two tags
git shortlog tag1..tag2
```

### [14. Comparing changes](https://www.vogella.com/tutorials/Git/article.html#analyzechanges)

#### [14.1. Listing changed files](https://www.vogella.com/tutorials/Git/article.html#gitstatus)

The `git status` command shows the current status of your repository and possible actions which you can perform.

It shows which files have changed, which are staged and which are not part of the staging area. It also shows which files have merge conflicts and gives an indication what the user can do with these changes, e.g., add them to the staging area or remove them, etc.

`git status -u` shows all untracked files. Otherwise, if you have a new directory with severals files, only the directory is shown.

#### [14.2. Example: Using git status](https://www.vogella.com/tutorials/Git/article.html#gitstatus_example)

The following commands create some changes in your Git repository.

Make some changes in your working tree

```
# assumes that the test01  and test02 files exist
# and have been committed in the past
echo "This is a new change to the file" > test01
echo "and this is another new change" > test02

# create a new file
ls > newfileanalyzis.txt
```

Now use the status command.

The output of the command looks like the following listing.

```
# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.
#   (use "git push" to publish your local commits)
#
# Changes not staged for commit:
#   (use "git add <file>..." to update what will be committed)
#   (use "git checkout -- <file>..." to discard changes in working directory)
#
#   modified:   test01
#   modified:   test02
#
# Untracked files:
#   (use "git add <file>..." to include in what will be committed)
#
#   newfileanalyzis.txt
no changes added to commit (use "git add" and/or "git commit -a")
```

#### [14.3. Using git diff](https://www.vogella.com/tutorials/Git/article.html#gitdiff_using)

The `git diff` command allows you to compare changes between commits, the staging area and working tree, etc. Via an optional third parameter you can specify a path to filter the displayed changes path can be a file or directory `git diff [path]`.

The following example code demonstrate the usage of the `git diff` command.

Make some changes in your working tree

```
echo "This is a change" > test01
echo "and this is another change" > test02
```

Use the git diff command

```
git diff (1)

git diff --cached (2)

git diff COMMMIT_REF1 COMMMIT_REF2 (3)

git diff -- [file_reference] (4)
```

**1**

shows the changes introduced in the working tree compared with the staging area

**2**

shows the differences between the staging area and the last commit

**3**

shows the differences introduced between two commits references

**4**

shows the differences introduced in the working tree compared with the staging area for \[file\_reference]

### [15. Analyzing the commit history with git log](https://www.vogella.com/tutorials/Git/article.html#analyzechanges_in_githistory)

#### [15.1. Using git log](https://www.vogella.com/tutorials/Git/article.html#analyzechanges_log_git)

The `git log` command shows the history of the Git repository. If no commit reference is specified it starts from the commit referred to by the HEAD pointer.

```
git log

git log HEAD~10 (1)

git log COMMIT_REF (2)
```

**1**

shows the history of commits starting from the HEAD\~10 commit

**2**

shows the history of commits starting from the COMMIT\_REF commit

#### [15.2. Helpful parameters for git log](https://www.vogella.com/tutorials/Git/article.html#git_log_options)

The following gives an overview of useful parameters for the `git log` command.

```
git log --oneline  (1)
git log --abbrev-commit (2)
git log --graph --oneline (3)
git log --decorate (4)
```

**1**

`--oneline` - fits the output of the `git log` command in one line. `--online` is a shorthand for "--pretty=oneline --abbrev-commit"

**2**

`--abbrev-commit` - the log command uses shorter versions of the SHA-1 identifier for a commit object but keeps the SHA-1 unique. This parameter uses 7 characters by default, but you can specify other numbers, e.g., `--abbrev-commit --abbrev=4`.

**3**

`graph` - draws a text-based graphical representation of the branches and the merge history of the Git repository.

**4**

decorate - adds symbolic pointers to the log output

For more options on the `git log` command see the [Git log manpage](https://www.kernel.org/pub/software/scm/git/docs/git-log.html).

#### [15.3. View the change history of a file](https://www.vogella.com/tutorials/Git/article.html#analyzechangesg_changesinafile)

To see changes in a file you can use the `-p` option in the `git log` command.

```
git log -- [file_reference] (1)

git log -p -- [file_reference]  (2)

git log --follow -p -- [file_reference] (3)
```

**1**

\- shows the list of commits for this file

**2**

\- the `-p` parameter triggers that the diffs of each commit is shown

**3**

\- `--follow` allow include renames in the log output

#### [15.4. Configuring output format](https://www.vogella.com/tutorials/Git/article.html#analyzechanges_output)

You can use the `--pretty` parameter to configure the output.

```
# command must be issued in one line, do not enter the line break
git log --pretty=format:'%Cred%h%Creset %d%Creset %s %Cgreen(%cr)
 %C(bold blue)<%an>%Creset' --abbrev-commit
```

This command creates the output.

![Git log pretty output](https://www.vogella.com/tutorials/Git/img/gitlogpretty10.png)

Git allows you to create a short form of one or several existing Git commands. You can define an alias for such long commands.

#### [15.5. Filtering based on the commit message via regular expressions](https://www.vogella.com/tutorials/Git/article.html#analyzechanges_grep)

You can filter the output of the `git log` command to commits whose commit message, or reflog entry, respectively, matches the specified regular expression pattern with the `--grep=<pattern>` and `--grep-reflog=<pattern>` option.

For example the following command instructs the log command to list all commits which contain the word "workspace" in their commit message.

```
git log --oneline --grep="workspace" (1)
```

**1**

Greps in commit message for "workspace", oneline parameter included for better readability of the output

There is also the `--invert-grep=<pattern>` option. When this option is used, git log lists the commits that don't match the specified pattern.

#### [15.6. Filtering the log output based on author or committer](https://www.vogella.com/tutorials/Git/article.html#analyzechanges_user)

You can use the `--author=<pattern>` or `--committer=<pattern>` to filter the log output by author or committer. You do not need to use the full name, if a substring matches, the commit is included in the log output.

The following command lists all commits with an author name containing the word "Vogel".

### [17. Using the Git blame command](https://www.vogella.com/tutorials/Git/article.html#using-the-git-blame-command)

#### [17.1. Analyzing line changes with git blame](https://www.vogella.com/tutorials/Git/article.html#git_blame_def)

Using the Git log command and filtering the history is a useful tool for inspecting the project history. However, if you look at a particular file and find a bug in a particular line of code you would like to instantly know who was the last person who changed this line of code. Additionally, you would like to know why the developer did that i.e. locate the commit in which the change was done.

In Git, this feature is called _git blame_ or _git annotate_. The `git blame` command allows you to see which commit and author modified a file on a per line base. That is very useful to identify the person or the commit which introduced a change.

#### [17.2. Example: git blame](https://www.vogella.com/tutorials/Git/article.html#git_blame_example)

The following code snippet demonstrates the usage of the `git blame` command.

```
# git blame shows the author and commit per
# line of a file
git blame [filename]

# the -L option allows limiting the selection
# for example by line number

# only show line 1 and 2 in git blame
git blame -L 1,2 [filename]
```

The `git blame` command can also ignore whitespace changes with the `-w` parameter.

### [18. Commit history of a repository or certain files](https://www.vogella.com/tutorials/Git/article.html#gitk)

[Gitk](http://git-scm.com/docs/gitk) can be used to visualize the history of a repository of certain files.

In some cases simply using `git blame` is not sufficient in order to see all details of certain changes. You can navigate to the file location in the target git repository and use the `gitk [filename]` command to see all commits of a file in a clear UI.

In this screenshot we can see all commits of the `ShowViewHandler.java` by using the `gitk ShowViewHandler.java` command:

![gitk command for the ShowViewHandler](https://www.vogella.com/tutorials/Git/img/gitk_showviewhandler.png)

On Linux you can easily install gitk by using the `sudo apt-get install gitk` command in a terminal.

### [19. git shortlog for release announcements](https://www.vogella.com/tutorials/Git/article.html#gitshortlog)

git shortlog The `git shortlog` command summarizes the `git log` output. It groups all commits by author and includes the first line of the commit message.

The `-s` option suppresses the commit message and provides a commit count. The `-n` option sorts the output based on the number of commits by author.

```
# gives a summary of the changes by author
git shortlog

# compressed summary
# -s summary, provides a commit count summary only
# -n sorted by number instead of name of the author
git shortlog -sn
```

This command also allows you to see the commits done by a certain author or committer.

```
# see the commits by the author "Lars Vogel"
git shortlog --author="Lars Vogel"

# see the commits by the author "Lars Vogel"
# restricted by the last years
git shortlog --author="Lars Vogel" --since=2years

# see the number of commits by the author "Lars Vogel"
git shortlog -s --author="Lars Vogel" --since=2years
```

### [20. Stashing changes in Git](https://www.vogella.com/tutorials/Git/article.html#stash_usage)

#### [20.1. The git stash command](https://www.vogella.com/tutorials/Git/article.html#the-git-stash-command)

Git provides the `git stash` command which allows you to record the current state of the working directory and the staging area and to revert to the last committed revision.

This allows you to pull in the latest changes or to develop an urgent fix. Afterwards you can restore the stashed changes, which will reapply the changes to the current version of the source code.

#### [20.2. When to use git stash](https://www.vogella.com/tutorials/Git/article.html#stash_usage2)

In general using the stash command should be the exception in using Git. Typically, you would create new branches for new features and switch between branches. You can also commit frequently in your local Git repository and use interactive rebase to combine these commits later before pushing them to another Git repository.

Even if you prefer not to use branches, you can avoid using the `git stash` command. In this case you commit the changes you want to put aside and amend the commit with the next commit. If you use the approach of creating a commit, you typically put a marker in the commit message to mark it as a draft, e.g., "\[DRAFT] implement feature x".

#### [20.3. Example: Using the git stash command](https://www.vogella.com/tutorials/Git/article.html#stash_example)

The following commands will save a stash and reapply them after some changes.

```
# create a stash with uncommitted changes
git stash

# do changes to the source, e.g., by pulling
# new changes from a remote repo

# afterwards, re-apply the stashed changes
# and delete the stash from the list of stashes
git stash pop
```

It is also possible to keep a list of stashes.

```
# create a stash with uncommitted changes
git stash save

# see the list of available stashes
git stash list
# result might be something like:
stash@{0}: WIP on master: 273e4a0 Resize issue in Dialog
stash@{1}: WIP on master: 273e4b0 Silly typo in Classname
stash@{2}: WIP on master: 273e4c0 Silly typo in Javadoc

# you can use the ID to apply a stash
git stash apply stash@{0}

# or apply the latest stash and delete it afterwards
git stash pop

# you can also remove a stashed change
# without applying it
git stash drop stash@{0}

# or delete all stashes
git stash clear
```

#### [20.4. Create a branch from a stash](https://www.vogella.com/tutorials/Git/article.html#stash_branchexample)

You can also create a branch for your stash if you want to continue to work on the stashed changes in a branch. This can be done with the following command.

```
# create a new branch from your stack and
# switch to it
git stash branch newbranchforstash
```

### [21. Remove untracked files with git clean](https://www.vogella.com/tutorials/Git/article.html#remove-untracked-files-with-git-clean)

#### [21.1. Removing untracked files](https://www.vogella.com/tutorials/Git/article.html#gitclean_command)

If you have untracked files in your working tree which you want to remove, you can use the `git clean` command.

Be careful with this command. All untracked files are removed if you run this command. You will not be able to restore them, as they are not part of your Git repository.

#### [21.2. Example: Using git clean](https://www.vogella.com/tutorials/Git/article.html#gitclean_example)

The following commands demonstrate the usage of the `git clean` command.

```
# create a new file with content
echo "this is trash to be deleted" > test04

# make a dry-run to see what would happen
# -n is the same as --dry-run
git clean -n

# delete, -f is required if
# variable clean.requireForce is not set to false
git clean -f

# use -d flag to delete new directories
# use -x to delete hidden files, e.g., ".example"
git clean -fdx
```

### [22. Revert uncommitted changes in tracked files](https://www.vogella.com/tutorials/Git/article.html#undochanges)

#### [22.1. Use cases](https://www.vogella.com/tutorials/Git/article.html#undochanges_usecase)

If you have a tracked file in Git, you can always recreate the file content based on the staging area or based on a previous commit. You can also remove staged changes from the staging area to avoid that these changes are included in the next commit. This chapter explains you how you can do this.

#### [22.2. Remove staged changes from the staging area](https://www.vogella.com/tutorials/Git/article.html#undochanges_reset)

Staging area, remove staged changes You can use the `git reset [paths]` command to remove staged changes from the staging area. This means that `git reset [paths]` is the opposite of `git add [paths]`. It avoids that the changes are included in the next commit. The changes are still available in the working tree, e.g., you will not lose your changes and can stage and commit them at a later point.

In the following example you create a new file and change an existing file. Both changes are staged.

```
# do changes
touch unwantedstaged.txt
echo "more.." >> test02

// add changes to staging area
git add unwantedstaged.txt
git add test02

# see the status
git status
```

The output of `git status` command should look similar to the following.

```
On branch master
Changes to be committed:
  (use "git reset HEAD <file>..." to unstage)

    modified:   test02
    new file:   unwantedstaged.txt
```

Remove the changes from the staging area with the following command.

```
# remove test02 from the staging area
git reset test02

# remove unwantedstaged.txt from the staging area
git reset unwantedstaged.txt
```

Use the `git status` command to see the result.

```
On branch master
Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)

    modified:   test02

Untracked files:
  (use "git add <file>..." to include in what will be committed)

    unwantedstaged.txt

no changes added to commit (use "git add" and/or "git commit -a")
```

The `git reset` behaves differently depending on the options you provide.

#### [22.3. Remove changes in the working tree](https://www.vogella.com/tutorials/Git/article.html#undochanges_checkout)

Be careful with the following command. It allows you to override the changes in files in your working tree. You will not be able to restore these changes.

Changes in the working tree which are not staged can be undone with `git checkout` command. This command resets the file in the working tree to the latest staged version. If there are no staged changes, the latest committed version is used for the restore operation.

```
# delete a file
rm test01

# revert the deletion
git checkout -- test01

# note git checkout test01 also works but using
# two - ensures that Git understands that test01
# is a path and not a parameter

# change a file
echo "override" > test01

# restore the file
git checkout -- test01
```

For example, you can restore the content of a directory called `data` with the following command.

#### [22.4. Remove changes in the working tree and the staging area](https://www.vogella.com/tutorials/Git/article.html#undochanges_directorydeletion)

If you want to undo a staged but uncommitted change, you use the `git checkout [commit-pointer] [paths]` command. This version of the command resets the working tree and the staged area.

The following demonstrates the usage of this to restore a delete directory.

```
# create a demo directory
mkdir checkoutheaddemo
touch checkoutheaddemo/myfile
git add .
git commit -m "Adds new directory"

# now delete the directory and add the change to
# the staging area
rm -rf checkoutheaddemo
# Use git add . -A for Git version < 2.0
git add .

# restore the working tree and reset the staging area
git checkout HEAD -- your_dir_to_restore
```

The additional commit pointer parameter instructs the `git checkout` command to reset the working tree and to also remove the staged changes.

#### [22.5. Remove staging area based on last commit change](https://www.vogella.com/tutorials/Git/article.html#undochanges_indexexisting)

When you have added the changes of a file to the staging area, you can also revert the changes in the staging area base on the last commit.

```
# some nonsense change
echo "change which should be removed later" > test01

# add the file to the staging area
git add test01

# restores the file based on HEAD in the staging area
git reset HEAD test01
```

### [23. Using Git reset](https://www.vogella.com/tutorials/Git/article.html#resetcommitsdef)

#### [23.1. Moving the HEAD and branch pointer](https://www.vogella.com/tutorials/Git/article.html#movebranchpointer)

Sometimes you want to change the commit your branch pointer is pointing to. The `git reset` command allows you to manually set the current HEAD pointer (and its associated branch) to a specified commit. This is for example useful to undo a particular change or to build up a different commit history.

![Git reset](https://www.vogella.com/tutorials/Git/img/gitreset10.png)

All commits which were originally pointed to by the HEAD pointer and the commit pointed to by HEAD after the reset, are _reseted_, e.g., not directly visible anymore from the current HEAD and branch pointer.

Via parameters you can decide what you happen to the changes in the working tree and changes which were included in the commits between the original commit and the commit now referred to by the HEAD pointer. As a reminder, the working tree contains the files and the staging area contains the changes which are marked to be included in the next commit. Depending on the specified parameters the `git reset` command performs the following:

1. If you specify the `--soft` parameter, the `git reset` command moves the HEAD pointer. Changes in the working tree will be left unchanged and all changes which were commited included in commits which are reseted are staged.
2. If you specify the `--mixed` parameter (the default), the `git reset` command moves the HEAD pointer and resets the staging area to the new HEAD. Any file change between the original commit and the one you reset to shows up as modifications (or untracked files) in your working tree. Use this option to remove commits but keep all the work you have done. You can do additional changes, stage changes and commit again. This way you can build up a different commit history.
3. If you specify the `--hard` parameter, the `git reset` command moves the HEAD pointer and resets the staging area and the working tree to the new HEAD. This effectively removes the changes you have done between the original commit and the one you reset to.

Via parameters you can define if the staging area and the working tree is updated. These parameters are listed in the following table.

Table 2. git reset options

Reset

Branch pointer

Working tree

Staging area

soft

Yes

No

No

mixed (default)

Yes

No

Yes

hard

Yes

Yes

Yes

The `git reset` command does not remove untracked files. If you have untracked files in your working tree which you want to remove, you can use the `git clean` command.

### [25. Deleting changes in the working tree and staging area for tracked files](https://www.vogella.com/tutorials/Git/article.html#cleanworkingdir)

The `git reset --hard` command makes the working tree exactly match HEAD.

```
# removes staged and working tree changes
# of committed files
git reset --hard
```

If you have tracked files with modifications, you lose these changes with the above command.

The reset command does not delete untracked files. If you also want to delete them, use the `git reflog` command.

#### [25.1. Using git reset to squash commits](https://www.vogella.com/tutorials/Git/article.html#resettosquash)

git reset, squash commits As a soft reset does not remove your change to your files and index, you can use the `git reset --soft` command to squash several commits into one commit.

As the staging area is not changed with a soft reset, you keep it in the desired state for your new commit. This means that all the file changes from the commits which were reseted are still part of the staging area.

```
# squashes the last two commits
git reset --soft HEAD~1 && git commit -m "new commit message"
```

The interactive rebase adds more flexibility to squashing commits and allows to use the existing commit messages.

### [26. Retrieving files from the history](https://www.vogella.com/tutorials/Git/article.html#retrievefiles)

#### [26.1. View file in different revision](https://www.vogella.com/tutorials/Git/article.html#retrievefiles_show)

The `git show` command allows to see and retrieve files from branches, commits and tags. It allows seeing the status of these files in the selected branch, commit or tag without checking them out into your working tree.

By default, this command addresses a file from the root of the repository, not the current directory. If you want the current directory then you have to use the ./ specifier. For example to address the `pom.xml` file the current directory use: `./pom.xml`

The following commands demonstrate that. You can also make a copy of the file.

```
# [reference] can be a branch, tag, HEAD or commit ID
# [file_path] is the file name including path

git show [reference]:[file_path]

# to make a copy to copiedfile.txt

git show [reference]:[file_path] > copiedfile.txt

# assume you have two pom.xml files. One in the root of the Git
# repository and one in the current working directory

# address the pom.xml in the git root folder
git show HEAD:pom.xml

# address the pom in the current directory
git show HEAD:./pom.xml
```

#### [26.2. Restore a deleted file in a Git repo](https://www.vogella.com/tutorials/Git/article.html#retrievefiles_fromcommit)

You can checkout a file from the commit. To find the commit which deleted the file you can use the `git log` or the `git ref-list` command as demonstrated by the following command.

```
# see history of file
git log -- <file_path>

# checkout file based on predecessors the last commit which affect it
# this was the commit which delete the file
git checkout [commit] ^ -- <file_path>

# alternatively use git rev-list
git rev-list -n 1 HEAD -- <file_path>

# afterwards, the same checkout based on the predecessors
git checkout [commit] ^ -- <file_path>
```

### [27. See which commit deleted a file](https://www.vogella.com/tutorials/Git/article.html#retrievefiles_finddeletedfile)

The `git log` command allows you to determine which commit deleted a file. You can use the `--` option in `git log` to see the commit history for a file, even if you have deleted the file.

```
# see the changes of a file, works even
# if the file was deleted
git log --full-history -- [file_path]

# limit the output of Git log to the
# last commit, i.e. the commit which delete the file
# -1 to see only the last commit
# use 2 to see the last 2 commits etc
git log --full-history -1 -- [file_path]

# include stat parameter to see
# some statics, e.g., how many files were
# deleted
git log --full-history -1 --stat -- [file_path]
```

### [28. Revert commits](https://www.vogella.com/tutorials/Git/article.html#revertcommit)

#### [28.1. Reverting a commit](https://www.vogella.com/tutorials/Git/article.html#undochanges_revertcommit1)

git revert You can revert commits via the `git revert` command. This command reverts the changes of a commit.

Such commits are useful to document that a change was withdrawn.

### [29. Resetting the working tree based on a commit](https://www.vogella.com/tutorials/Git/article.html#undochanges_checkoutcommits)

#### [29.1. Checkout based on commits and working tree](https://www.vogella.com/tutorials/Git/article.html#undochanges_checkoutcommits1)

git checkout, based on commit ID

You can check out arbitrary revisions of your file system via the git checkout command followed by the commit ID. This command will reset your complete _working tree_ to the status described by this commit.

The commit ID is shown if you enter the `git log` command.

The following command shows the log.

```
# displays the commit history of the repository
# which contains the commit ID, author, message etc.
git log
```

The following listing shows an example output of a Git log command.

```
commit 046474a52e0ba1f1435ad285eae0d8ef19d529bf
Author: Lars Vogel <Lars.Vogel@gmail.com>
Date:   Wed Jun 5 12:13:04 2013 +0200

    Bug 409373 - Updates version number of e4 tools

    Repairs the build

commit 2645d7eef0e24195fc407137200fe7e1795ecf49
Author: Lars Vogel <Lars.Vogel@gmail.com>
Date:   Wed Jun 5 12:00:53 2013 +0200

    Bug 409373 - Updates version number of e4 CSS spy features
```

#### [29.2. Example: Checkout a commit](https://www.vogella.com/tutorials/Git/article.html#undochanges_checkoutcommits2)

To checkout a specific commit you can use the following command.

```
# checkout the older revision via
git checkout [commit_id]

# based on the example output this could be
git checkout 046474a52e0ba1f1435ad285eae0d8ef19d529bf

# or you can use the abbreviated version
git checkout 046474a5
```

If you checkout a commit, you are in the _detached head mode_ and commits in this mode are harder to find after you checkout another branch. Before committing it is good practice to create a new branch.

### [30. Recovering lost commits](https://www.vogella.com/tutorials/Git/article.html#recovering-lost-commits)

#### [30.1. Detached HEAD](https://www.vogella.com/tutorials/Git/article.html#detached-head)

If you checkout a commit or a tag, you are in the so-called _detached HEAD mode_. If you commit changes in this mode, you have no branch which points to this commit. After you checkout a branch you cannot see the commit you did in detached head mode in the `git log` command.

To find such commits you can use the `git reflog` command.

#### [30.2. git reflog](https://www.vogella.com/tutorials/Git/article.html#git-reflog)

Reflog is a mechanism to record the movements of the _HEAD_ and the branches references.

The reflog command gives a history of the complete changes of the _HEAD_ reference.

```
git reflog
# <output>
# ... snip ...
1f1a73a HEAD@{2}: commit: More chaanges - typo in the commit message
45ca204 HEAD@{3}: commit: These are new changes
cf616d4 HEAD@{4}: commit (initial): Initial commit
```

The `git reflog` command also list commits which you have removed.

There are multiple reflogs: one per branch and one for HEAD. For branches use the `git reflog [branch]` command and for HEAD use the `git reflog` or the `git reflog HEAD` command.

#### [30.3. Example](https://www.vogella.com/tutorials/Git/article.html#gitreflog_example)

The following example shows how you can use git reflog to reset the current local branch to a commit which isn't reachable from the current branch anymore.

```
# assume the  ID for the second commit is
# 45ca2045be3aeda054c5418ec3c4ce63b5f269f7

# resets the head for your tree to the second commit
git reset --hard 45ca2045be3aeda054c5418ec3c4ce63b5f269f7

# see the log
git log

# output shows the history until the 45ca2045be commit

# see all the history including the deletion
git reflog

# <output>
cf616d4 HEAD@{1}: reset: moving to 45ca2045be3aeda054c5418ec3c4ce63b5f269f7
# ... snip ...
1f1a73a HEAD@{2}: commit: More chaanges - typo in the commit message
45ca204 HEAD@{3}: commit: These are new changes
cf616d4 HEAD@{4}: commit (initial): Initial commit

git reset --hard 1f1a73a
```

### [31. Remote and local tracking branches](https://www.vogella.com/tutorials/Git/article.html#gitremotebranch)

#### [31.1. Remote tracking branches](https://www.vogella.com/tutorials/Git/article.html#remote-tracking-branches)

Your local Git repository contains references to the state of the branches on the remote repositories to which it is connected. These local references are called _remote-tracking branches_.

You can see your remote-tracking branches with the following command.

```
# list all remote branches
git branch -r
```

To update remote-tracking branches without changing local branches you use the `git fetch` command.

It is safe to delete a remote branch in your local Git repository, this does not affect a remote repository. The next time you run the `git fetch` command, the remote branch is recreated. You can use the following command for that.

```
# delete remote branch from origin

git branch -d -r origin/[remote_branch]
```

#### [31.2. Delete a remote branch](https://www.vogella.com/tutorials/Git/article.html#gitremotebranch_deleteremote)

To delete the branch in a remote repository use the following command.

```
# delete branch in a remote repository

git push [remote] --delete [branch]
```

#### [31.3. Tracking branches](https://www.vogella.com/tutorials/Git/article.html#git_trackingbranches)

Branches can track another branch. This is called _to have an upstream branch_ and such branches can be referred to as _tracking branches_.

_Tracking branches_ allow you to use the `git pull` and `git push` command directly without specifying the branch and repository.

If you clone a Git repository, your local _master_ branch is created as a _tracking branch_ for the _master_ branch of the _origin_ repository (short: _origin/master_ ) by Git.

You create new _tracking branches_ by specifying the _remote branch_ during the creation of a branch. The following example demonstrates that.

```
# setup a tracking branch called newbrach
# which tracks origin/newbranch
git checkout -b newbranch origin/newbranch
```

Instead of using the `git checkout` command you can also use the `git branch` command.

```
# origin/master used as example, but can be replaced

# create branch based on remote branch
git branch [new_branch] origin/master

# use --track,
# default when the start point is a remote-tracking branch
git branch --track [new_branch] origin/master
```

The `--no-track` allows you to specify that you do not want to track a branch. You can explicitly add a tracking branch with the `git branch -u` command later.

```
# instruct Git to create a branch which does
# not track another branch
git branch --no-track [new_branch_notrack] origin/master

# update this branch to track the origin/master branch
git branch -u origin/master [new_branch_notrack]
```

To see the tracking branches for a remote repository (short: remote) you can use the following command.

```
# show all remote and tracking branches for origin
git remote show origin
```

An example output of this might look as follows.

```
* remote origin
  Fetch URL: ssh://test@git.eclipse.org/gitroot/e4/org.eclipse.e4.tools.git
  Push  URL: ssh://test@git.eclipse.org/gitroot/e4/org.eclipse.e4.tools.git
  HEAD branch: master
  Remote branches:
    integration                tracked
    interm_rc2                 tracked
    master                     tracked
    smcela/HandlerAddonUpdates tracked
  Local branches configured for 'git pull':
    integration rebases onto remote integration
    master      rebases onto remote master
    testing     rebases onto remote master
  Local refs configured for 'git push':
    integration pushes to integration (up to date)
    master      pushes to master      (up to date)
```

### [32. Updating your remote-tracking branches with git fetch](https://www.vogella.com/tutorials/Git/article.html#updating-your-remote-tracking-branches-with-git-fetch)

#### [32.1. Fetch](https://www.vogella.com/tutorials/Git/article.html#fetch)

The `git fetch` command updates your remote-tracking branches, i.e., it updates the local copy of branches stored in a remote repository. The following command updates the remote-tracking branches from the repository called _origin_.

The fetch command only updates the _remote-tracking branches_ and none of the local branches. It also does not change the working tree of the Git repository. Therefore, you can run the `git fetch` command at any point in time.

After reviewing the changes in the remote tracking branchm you can merge the changes into your local branches or rebase your local branches onto the remote-tracking branch.

Alternatively you can also use the `git cherry-pick commit_id` command to take over only selected commits.

#### [32.2. Fetch from all remote repositories](https://www.vogella.com/tutorials/Git/article.html#gitfetch_updateremotes)

The `git fetch` command updates only the remote-tracking branches for one remote repository. In case you want to update the remote-tracking branches of all your remote repositories you can use the following command.

```
# simplification of the fetch command
# this runs git fetch for every remote repository
git remote update

# the same but remove all stale branches which
# are not in the remote anymore
git remote update --prune
```

#### [32.3. Compare remote-tracking branch with local branch](https://www.vogella.com/tutorials/Git/article.html#gitfetch_compare)

The following code shows a few options how you can compare your branches.

```
# show the log entries between the last local commit and the
# remote branch
git log HEAD..origin/master

# show the diff for each patch
git log -p HEAD..origin/master

# show a single diff
git diff HEAD...origin/master

# instead of using HEAD you can also
# specify the branches directly
git diff master origin/master
```

The above commands show the changes introduced in HEAD compared to origin. If you want to see the changes in origin compared to HEAD, you can switch the arguments or use the `-R` parameter.

#### [32.4. Rebase your local branch onto the remote-tracking branch](https://www.vogella.com/tutorials/Git/article.html#gitfetch_rebase)

You can rebase your current local branch onto a remote-tracking branch. The following commands demonstrate that.

```
# assume you want to rebase master based on the latest fetch
# therefore check it out
git checkout master

# update your remote-tracking branch
git fetch

# rebase your master onto origin/master
git rebase origin/master
```

#### [32.5. Fetch compared with pull](https://www.vogella.com/tutorials/Git/article.html#gitremotebranch_fetchpull)

The `git pull` command performs a `git fetch` and `git merge` (or `git rebase` based on your Git settings). The `git fetch` does not perform any operations on your local branches. You can always run the fetch command and review the incoming changes.

### [33. Merging](https://www.vogella.com/tutorials/Git/article.html#gitmerge_definition)

Git allows you to combine the changes which were created on two different branches. One way to achieve this is _merging_, which is described in this chapter. You can merge based on branches, tags or commits. Other ways are using rebase or cherry-pick.

This part explains how to merge changes between two different branches under the assumption that no merging conflicts happen. Solving conflicts is covered in [What is a conflict during a merge operation?](https://www.vogella.com/tutorials/Git/article.html#mergeconflict_definition).

#### [33.1. Fast-forward merge](https://www.vogella.com/tutorials/Git/article.html#fast-forward-merge)

If the commits which are merged are direct successors of the _HEAD_ pointer of the current branch, Git performs a so-called _fast forward merge_. This _fast forward merge_ only moves the _HEAD_ pointer of the current branch to the tip of the branch which is being merged.

This process is depicted in the following diagram. The first picture assumes that master is checked out and that you want to merge the changes of the branch labeled "branch 1" into your "master" branch. Each commit points to its predecessor (parent).

![Fast forward merge starting](https://www.vogella.com/tutorials/Git/img/merge_fastforward10.png)

After the fast-forward merge the _HEAD_ points to the master branch pointing to "Commit 3". The "branch 1" branch points to the same commit.

![Fast forward merge result](https://www.vogella.com/tutorials/Git/img/merge_fastforward20.png)

#### [33.2. Merge commit](https://www.vogella.com/tutorials/Git/article.html#gitmerge_mergecommit)

If commits are merged which are not direct predecessors of the current branch, Git performs a so-called _three-way-merge_ between the latest commits of the two branches, based on the most recent common predecessor of both.

![Original state before the merge commit](https://www.vogella.com/tutorials/Git/img/merge_commit10.png)

As a result a so-called _merge commit_ is created on the current branch. It combines the respective changes from the two branches being merged. This commit points to both of its predecessors.

![Merge commit](https://www.vogella.com/tutorials/Git/img/merge_commit20.png)

If multiple common predecessors exist, Git uses recursion to create a virtual common predecessor. For this Git creates a merged tree of the common ancestors and uses that as the reference for the 3-way merge. This is called the _recursive merge_ strategy and is the default merge strategy.

#### [33.3. Merge strategies - Octopus, Subtree, Ours](https://www.vogella.com/tutorials/Git/article.html#gitmerge_octopus)

If a fast-forward merge is not possible, Git uses a merge strategy. The default strategy called _recursive merge_ strategy was described in [Merge commit](https://www.vogella.com/tutorials/Git/article.html#gitmerge_mergecommit).

The Git command line tooling also supports the _octopus merge_ strategy for merges of multiple references. With this operation it can merge multiple branches at once.

The `subtree` option is useful when you want to merge in another project into a sub-directory of your current project. It is rarely used and you should prefer the usage of Git submodules. See [Git Submodules](https://www.vogella.com/tutorials/GitSubmodules/article.html) for more information.

The `ours` strategy merges a branch without looking at the changes introduced in this branch. This keeps the history of the merged branch but ignores the changes introduced in this branch.

You can use the _ours_ merge strategy to document that you have integrated a branch and decided to ignore all changes from this branch.

#### [33.4. Using the git merge command](https://www.vogella.com/tutorials/Git/article.html#gitmergecommand_branches)

The `git merge` command performs a merge. You can merge changes from one branch to the current active one via the following command.

```
# syntax: git merge <branch-name>
# merges into your currently checked out branch
git merge testing
```

#### [33.5. Specifying merge strategies](https://www.vogella.com/tutorials/Git/article.html#gitmerge_mergeoptionsstrategies)

The `-s` parameter allows you to specify other merge strategies. This is demonstrated with the following command.

For example, you can specify the _ours_ strategy in which the result of the merge is always that of the current branch head, effectively ignoring all changes from all other branches. This is demonstrated with the following command.

```
# merge branch "obsolete" ignoring all
# changes in the branch
git merge -s ours obsolete
```

Be careful if you use the _ours_ merge strategy, it ignores everything from the branch which is merged.

The usage of the octopus merge strategy is triggered if you specify more than one reference to merge.

```
# merge the branch1 and the branch2 using
# changes in the branch
git merge branch1 branch2`
```

#### [33.6. Specifying parameters for the default merge strategy](https://www.vogella.com/tutorials/Git/article.html#gitmerge_mergeoptions)

The recursive merge strategy (default) allows you to specify flags with the `-X` parameter. For example you can specify here the `ours` option. This option forces conflicting changes to be auto-resolved by favoring the local version. Changes from the other branch that do not conflict with our local version are reflected to the merge result. For a binary file, the entire contents are taken from the local version.

The `ours` option for the _recursive_ merge strategy should not be confused with the _ours_ merge strategy.

A similar option to `ours` is the `theirs` option. This option prefers the version from the branch which is merged.

Both options are demonstrated in the following example code.

```
# merge changes preferring our version
git merge -s recursive -X ours [branch_to_merge]

# merge changes preferring the version from
# the branch to merge
git merge -s recursive -X theirs [branch_to_merge]
```

Another useful option is the `ignore-space-change` parameter which ignores whitespace changes.

For more information about the merge strategies and options see [Git merge manpage](https://www.kernel.org/pub/software/scm/git/docs/git-merge.html).

#### [33.7. Enforcing the creation of a merge commit](https://www.vogella.com/tutorials/Git/article.html#gitmerge_forcemergecommit)

If you prefer to have merge commits even for situations in which Git could perform a fast-forward merge you can use the `git merge --no-ff` command.

The `--no-ff` parameter can make sense if you want to record in the history at which time you merged from a maintenance branch to the master branch.

When pulling from a remote repository, prefer doing a rebase to a merge. This will help to keep the history easier to read. A merge commit can be helpful to document that functionality was developed in parallel.

### [34. Rebasing branches](https://www.vogella.com/tutorials/Git/article.html#rebase)

#### [34.1. Rebasing branches](https://www.vogella.com/tutorials/Git/article.html#rebase_branches)

You can use Git to rebase one branch on another one. As described, the `merge` command combines the changes of two branches. If you rebase a branch called A onto another, the `git` command takes the changes introduced by the commits of branch A and applies them based on the HEAD of the other branch. After this operation the changes in the other branch are also available in branch A.

The process is displayed in the following picture. We want to rebase the branch called `branch_1` onto master.

![Rebasing a branch](https://www.vogella.com/tutorials/Git/img/gitrebase10.png)

Running the rebase command creates a new commit with the changes of the branch on top of the master branch.

![Rebasing a branch result](https://www.vogella.com/tutorials/Git/img/gitrebase20.png)

Performing a rebase does not create a merge commit. The final result for the source code is the same as with merge but the commit history is cleaner; the history appears to be linear.

Rebase can be used to forward-port a feature branch in the local Git repository onto the changes of the master branch. This ensures that your feature is close to the tip of the upstream branch until it is finally published.

If you rewrite more than one commit by rebasing, you may have to solve conflicts per commit. In this case the merge operations might be simpler to be performed because you only have to solve merge conflicts once.

Also, if your policy requires that all commits result in correct software you have to test all the rewritten commits since they are "rewritten" by the rebase algorithm. Since merge/rebase/cherry-pick are purely text-based and do not understand the semantics of these texts they can end up with logically incorrect results. Hence, it might be more efficient to merge a long feature branch into upstream instead of rebasing it since you only have to review and test the merge commit.

You can use the rebase command to change your Git repository history commits. This is called _interactive_ rebase, see ? for information about this feature.

#### [34.2. Good practice for rebase](https://www.vogella.com/tutorials/Git/article.html#rebase_bestpractice)

You should avoid using the Git rebase operation for changes which have been published in other Git repositories. The Git rebase operation creates new commit objects, this may confuse other developers using the existing commit objects.

Assume that a user has a local feature branch and wants to push it to a branch on the remote repository. However, the branch has evolved and therefore pushing is not possible. Now it is good practice to fetch the latest state of the branch from the remote repository. Afterwards you rebase the local feature branch onto the remote tracking branch. This avoids an unnecessary merge commit. This rebasing of a local feature branch is also useful to incorporate the latest changes from remote into the local development, even if the user does not want to push right away.

Rebasing and amending commits is safe as long as you do not push any of the changes involved in the rebase. For example, when you cloned a repository and worked in this local repository. Rebasing is a great way to keep the history clean before contributing back your modifications.

In case you want to rewrite history for changes you have shared with others you need to use the `-f` parameter in your `git push` command and subsequently your colleagues have to use fetch -f to fetch the rewritten commits.

```
# using forced push
git push -f
```

#### [34.3. Example for a rebase](https://www.vogella.com/tutorials/Git/article.html#rebase_example)

The following demonstrates how to perform a rebase operation.

```
# create new branch
git checkout -b rebasetest

# create a new file and put it under revision control
touch rebase1.txt
git add . && git commit -m "work in branch"

# do changes in master
git checkout master

# make some changes and commit into testing
echo "rebase this to rebasetest later" > rebasefile.txt
git add rebasefile.txt
git commit -m "create new file"

# rebase the rebasetest onto master
git checkout rebasetest
git rebase master

# now you can fast forward your branch onto master
git checkout master
git merge rebasetest
```

### [35. Editing history with the interactive rebase](https://www.vogella.com/tutorials/Git/article.html#editing-history-with-the-interactive-rebase)

Git allows you to edit your commit history with a functionality called `interactive rebase`. For example, you can combine several commits into one commit, reorder or skip commits and edit the commit message.

This is useful as it allows the user to rewrite some commit history (cleaning it up) before pushing the changes to a remote repository.

Interactive rebase allows you to quickly edit a series of commits using the following actions:

Table 3. Interactive rebase actions

Action

Description

pick

includes the selected commit, moving pick entries enables reordering of commits

skip

removes a commit

edit

amends the commit

squash

combines the changes of the commit with the previous commit and combines their commit messages

fixup

squashes the changes of a commit into the previous commit discarding the squashed commit's message

reword

similar to pick but allows modifying the commit message

The setup for the rebase is called the _rebase plan_. Based on this plan, the actual interactive rebase can be executed.

It is safe to use interactive rebase as long as the commits have not been pushed to another repository. As the interactive rebase creates new commit objects, other developers might be confused if you rebase already published changes.

#### [35.1. Example: Interactive rebase](https://www.vogella.com/tutorials/Git/article.html#interactiverebase_example)

The following commands create several commits which will be used for the interactive rebase.

```
# create a new file
touch rebase.txt

# add it to git
git add . && git commit -m "add rebase.txt  to staging area"

# do some silly changes and commit
echo "content" >> rebase.txt
git add . && git commit -m "add content"
echo " more content" >> rebase.txt
git add . && git commit -m "just testing"
echo " more content" >> rebase.txt
git add . && git commit -m "woops"
echo " more content" >> rebase.txt
git add . && git commit -m "yes"
echo " more content" >> rebase.txt
git add . && git commit -m "add more content"
echo " more content" >> rebase.txt
git add . && git commit -m "creation of important configuration file"

# check the git log message
git log
```

We want to combine the last seven commits. You can do this interactively via the following command.

This command opens your editor of choice and lets you configure the rebase operation by defining which commits to _pick_, _squash_ or _fixup_.

The following listing shows an example of the selection. We pick the last commit, squash 5 commits and fix the sixth commit. The listing uses the long format of the commands (for example `fixup` instead of the short form `f` ) for better readability.

```
pick 7c6472e rebase.txt added to index
fixup 4f73e68 added content
fixup bc9ec3f just testing
fixup 701cbb5 ups
fixup 910f38b yes
fixup 31d447d added more content
squash e08d5c3 creation of important configuration file

# Rebase 06e7464..e08d5c3 onto 06e7464
#
# Commands:
#  p, pick = use commit
#  r, reword = use commit, but edit the commit message
#  e, edit = use commit, but stop for amending
#  s, squash = use commit, but meld into previous commit
#  f, fixup = like "squash", but discard this commit's log message
#  x, exec = run command (the rest of the line) using shell
#
# These lines can be re-ordered; they are executed from top to bottom.
#
# If you remove a line here THAT COMMIT WILL BE LOST.
# However, if you remove everything, the rebase will be aborted.
```

### [36. Using the Git cherry-pick command](https://www.vogella.com/tutorials/Git/article.html#using-the-git-cherry-pick-command)

#### [36.1. Applying a single commit with cherry-pick](https://www.vogella.com/tutorials/Git/article.html#cherrypick_definition)

The `git cherry-pick` command allows you to select the patch which was introduced with an individual commit and apply this patch on another branch. The patch is captured as a new commit on the other branch.

This way you can select individual changes from one branch and transfer them to another branch.

The new commit does not point back to its original commit so do not use cherry-pick blindly since you may end up with several copies of the same change. Most often cherry-pick is either used locally (to emulate an interactive rebase) or to port individual bug fixes done on a development branch into maintenance branches.

#### [36.2. Example: Using cherry-pick](https://www.vogella.com/tutorials/Git/article.html#cherrypick_example)

In the following example you create a new branch and commit two changes.

```
# create new branch
git checkout -b picktest

# create some data and commit
touch pickfile.txt
git add pickfile.txt
git commit -m "adds new file"

# create second commit
echo "changes to file" > pickfile.txt
git commit -a -m "changes in file"
```

You can check the commit history, for example, with the `git log --oneline` command.

```
# see change commit history

git log --oneline

# results in the following output

2fc2e55 changes in file
ebb46b7 adds new file
[MORE COMMITS]
330b6a3 initial commit
```

The following command selects the first commit based on the commit ID and applies its changes to the master branch. This creates a new commit on the master branch.

```
git checkout master
git cherry-pick ebb46b7
```

The `cherry-pick` command can be used to change the order of commits. `git cherry-pick` also accepts commit ranges for example in the following command.

```
git checkout master
# pick the last two commits
git cherry-pick picktest~1..picktest~2
```

Commit ranges can be used.

If things go wrong or you change your mind, you can always reset to the previous state using the following command.

### [37. Solving merge conflicts](https://www.vogella.com/tutorials/Git/article.html#mergeconflict)

#### [37.1. What is a conflict during a merge operation?](https://www.vogella.com/tutorials/Git/article.html#mergeconflict_definition)

Merge conflict A conflict during a merge operation occurs if two commits from different branches have modified the same content and Git cannot automatically determine how both changes should be combined when merging these branches.

This happens for example if the same line in a file has been replaced by two different commits.

If a conflict occurs, Git marks the conflict in the file and the programmer has to resolve the conflict manually.

After resolving it, he adds the file to the staging area and commits the change. These steps are required to finish the merge operation.

### [38. Keep a version of a file during a merge conflict](https://www.vogella.com/tutorials/Git/article.html#mergeconflict_theirs)

Merge conflict LARSSECONDARY"theirs parameter"LARSSECONDARY Merge conflict

LARSSECONDARY"ours parameter"LARSSECONDARY Sometimes if a conflict occurs the developer does not want to solve the conflict. He decides that he wants to keep the original version or the new version of the file.

For this, there is the `--theirs` and the `--ours` options on the `git checkout` command. The first option keeps the version of the file that you merged in, and the second option keeps the version before the merge operation was started.

```
git checkout --ours foo/bar.java
git add foo/bar.java
```

```
git checkout --theirs foo/bar.java
git add foo/bar.java
```

### [39. Example: Solving a conflict during a merge operation](https://www.vogella.com/tutorials/Git/article.html#example-solving-a-conflict-during-a-merge-operation)

#### [39.1. Create a conflict](https://www.vogella.com/tutorials/Git/article.html#mergeconflict_examplecreate)

In the following example you create a conflict during a merge operation.

The following steps create a merge conflict. It assumes that _repo1_ and _repo2_ have the same _origin_ repository defined.

```
# switch to the first directory
cd ~/repo01
# make changes
echo "Change in the first repository" > mergeconflict.txt
# stage and commit
git add . && git commit -a -m "Will create conflict 1"
```

```
# switch to the second directory
cd ~/repo02
# make changes
touch mergeconflict.txt
echo "Change in the second repository" > mergeconflict.txt
# stage and commit
git add . && git commit -a -m "Will create conflict 2"
# push to the master repository
git push
```

```
# switch to the first directory
cd ~/repo01

# now try to push from the first directory
# try to push --> assuming that the same remote repository is used,
# you get an error message
git push
```

As this push would not result in a non-fast-format merge, you receive an error message similar to the following listing.

```
 ! [rejected]        master -> master (fetch first)
error: failed to push some refs to '../remote-repository.git/'
hint: Updates were rejected because the remote contains work that you do
hint: not have locally. This is usually caused by another repository pushing
hint: to the same ref. You may want to first integrate the remote changes
hint: (e.g., 'git pull ...') before pushing again.
hint: See the 'Note about fast-forwards' in 'git push --help' for details.
```

To solve this, you need to integrate the remote changes into your local repository. In the following listing the `git fetch` command gets the changes from the remote repository. The `git merge` command tries to integrate it into your local repository.

```
# get the changes via a fetch
git fetch origin

# now merge origin/master into the local master
# this creates a merge conflict in your
# local repository
git merge origin/master
```

This creates the conflict and a message similar to the following.

```
Auto-merging mergeconflict.txt
CONFLICT (add/add): Merge conflict in mergeconflict.txt
Automatic merge failed; fix conflicts and then commit the result.
```

The resulting conflict is displayed in ? and solved in ?

If you use the `git pull` command it performs the "fetch and merge" or the "fetch and rebase" command together in one step. Whether merge or rebase is used depends on your Git configuration for the branch. See ? for the global configuration.

#### [39.2. Review the conflict in the file](https://www.vogella.com/tutorials/Git/article.html#mergeconflict_examplesee)

Git marks the conflicts in the affected files. In the example from ? one file has a conflict and the file looks like the following listing.

```
<<<<<<< HEAD
Change in the first repository
=======
Change in the second repository
>>>>>>> b29196692f5ebfd10d8a9ca1911c8b08127c85f8
```

The text above the ======= signs is the conflicting change from your current branch and the text below is the conflicting change from the branch that you are merging in.

#### [39.3. Solve a conflict in a file](https://www.vogella.com/tutorials/Git/article.html#mergeconflict_examplesolve)

In this example you resolve the conflict which was created in ? and apply the change to the Git repository.

To solve the merge conflict you edit the file manually. The following listing shows a possible result.

```
Change in the first and second repository
```

Afterwards add the affected file to the staging area and commit the result. This creates the merge commit. You can also push the integrated changes now to the remote repository.

```
# add the modified file
git add .

# creates the merge commit
git commit -m "Merge changes"

# push the changes to the remote repository
git push
```

Instead of using the `-m` option in the above example you can also use the `git commit` command without this option. In this case the command opens your default editor with the default commit message about the merged conflicts. It is good practice to use this message.

Alternatively, you could use the `git mergetool` command. `git mergetool` starts a configurable merge tool that displays the changes in a split screen. Some operating systems may come with a suitable merge tool already installed or configured for Git.

### [41. Handling a conflict during a rebase operation](https://www.vogella.com/tutorials/Git/article.html#rebaseconflict_solving)

If a conflict occurs during a rebase operation, the rebase operation stops and the developer needs to resolve the conflict. After he has solved the conflicts, the developer instructs Git to continue with the rebase operation.

A conflict during a rebase operation is solved similarly to the way a conflict during a merge operation is solved. The developer edits the conflicts and adds the files to the Git index. Afterwards he continues the rebase operation with the following command.

```
# rebase conflict is fixed, continue with the rebase operation
git rebase --continue
```

To see the files which have a rebase conflict use the following command.

```
# lists the files which have a conflict
git diff --name-only --diff-filter=U
```

You solve such a conflict the same way as you would solve a merge conflict.

You can also skip the commit which creates the conflict.

```
# skip commit which creates the conflict
git rebase --skip
```

### [42. Aborting a rebase operation](https://www.vogella.com/tutorials/Git/article.html#rebaseconflict_abort)

You can also abort a rebase operation with the following command.

```
# abort rebase and recreate the situation before the rebase
git rebase --abort
```

### [43. Picking theirs or ours for conflicting file](https://www.vogella.com/tutorials/Git/article.html#rebaseconflict_theirs)

If a file is in conflict, you can instruct Git to take the version from the new commit of the version of commit onto which the new changes are applied. This is sometimes easier than to solve all conflicts manually. For this you can use the `git checkout` with the `--theirs` or `--ours` flag. During the conflict `--ours` points to the file in the commit onto which the new commit is placed, i.g., using this skips the new changes for this file.

Therefore to ignore the changes in a commit for a file use the following command.

```
git checkout --ours foo/bar.java
git add foo/bar.java
```

To take the version of the new commit use the following command.

```
git checkout --theirs foo/bar.java
git add foo/bar.java
```

### [44. Define alias](https://www.vogella.com/tutorials/Git/article.html#alias)

#### [44.1. Using an alias](https://www.vogella.com/tutorials/Git/article.html#using-an-alias)

An _alias_ in Git allows you to create a short form of one or several existing Git commands. For example, you can define an alias which is a short form of your own favorite commands or you can combine several commands with an alias.

#### [44.2. Alias examples](https://www.vogella.com/tutorials/Git/article.html#alias_example)

The following defines an _alias_ to see the staged changes with the new `git staged` command.

```
git config --global alias.staged 'diff --cached'
```

Or you can define an _alias_ for a detailed `git log` command. The following command defines the `git ll` _alias_.

```
git config --global alias.ll 'log --graph --oneline --decorate --all'
```

You can also run external commands. In this case you start the _alias_ definition with a `!` character. For example, the following defines the `git ac` command which combines `git add . -A` and `git commit` commands.

```
# define alias
git config --global alias.act '!git add . -A && git commit'

# to use it
git act -m "message"
```

### [45. Git LFS](https://www.vogella.com/tutorials/Git/article.html#git-lfs)

When you add a file to your repository, Git LFS replaces its contents with a pointer, and stores the file contents in a local Git LFS cache.

When you push new commits to the server, any Git LFS files referenced by the newly pushed commits are transferred from your local Git LFS cache to the remote Git LFS store tied to your Git repository.

When you checkout a commit that contains Git LFS pointers, they are replaced with files from your local Git LFS cache, or downloaded from the remote Git LFS store.

To use Git LFS, you will need a Git LFS aware host such as Bitbucket Cloud or Bitbucket Server.

Enable it

sudo apt-get install git-lfs git lfs install # initialize the Git LFS project git lfs track "\*.iso"

git lfs track "\*.png" --lockable git lfs clone - Faster clone git lfs pull - Checkout any missing files

Lock file git lfs lock images/foo.jpg git lfs unlock images/foo.jpg git lfs unlock images/foo.jpg --force → Someone elses lock

Using it:

### [46. Error search with git bisect](https://www.vogella.com/tutorials/Git/article.html#bisect)

#### [46.1. Using git bisect](https://www.vogella.com/tutorials/Git/article.html#bisect_definition)

git bisect The `git bisect` command allows you to run a binary search through the commit history to identify the commit which introduced an issue. You specify a range of commits and a script that the `bisect` command uses to identify whether a commit is good or bad.

This script must return 0 if the condition is fulfilled and non-zero if the condition is not fulfilled.

#### [46.2. git bisect example](https://www.vogella.com/tutorials/Git/article.html#bisect_cloning)

Create a new Git repository, create the `text1.txt` file and commit it to the repository. Do a few more changes, remove the file and again do a few more changes.

We use a simple shell script which checks the existence of a file. Ensure that this file is executable.

```
#!/bin/bash
FILE=$1

if [ -f $FILE ];
then
   exit 0;
else
   exit 1;
fi
```

Afterwards use the `git bisect` command to find the bad commit. First you use the `git bisect start` command to define a commit known to be bad (showing the problem) and a commit known to be good (not showing the problem).

```
# define that bisect should check
# the last 5 commits
git bisect start HEAD HEAD~5
```

Afterwards run the bisect command using the shell script.

```
# assumes that the check script
# is a directory above the current
git bisect run ../check.sh test1.txt
```

The above commands serve as an example. The existence of a file can be easier verified with the `git bisect` command: `git bisect run test -f test1.txt`

### [47. Rewriting commit history with git filter-branch](https://www.vogella.com/tutorials/Git/article.html#filterbranch)

#### [47.1. Using the git filter branch command (filter-branch)](https://www.vogella.com/tutorials/Git/article.html#filterbranch_definition)

The `git filter-branch` command allows you to rewrite the Git commit history. This can be done for selected branches and you can apply custom filters on each revision. This creates different hashes for all modified commits. This implies that you get new IDs for all commits based on any rewritten commit.

The command allows you to filter for several values, e.g., the author, the message, etc. For details please see the [git-filter-branch manual page](http://www.kernel.org/pub/software/scm/git/docs/git-filter-branch.html)

Using the `filter-branch` command is dangerous as it changes the Git repository. It changes the commit IDs and reacting on such a change requires explicit action from the developer, e.g., trying to rebase the stale local branch onto the corresponding rewritten remote-tracking branch.

For example, you can use `git filter-branch` if you want to remove a file which contains a password from the Git history. Or you want to remove huge binary files from the history. To completely remove such files, you need to run the `filter-branch` command on all branches.

#### [47.2. filter-branch examples](https://www.vogella.com/tutorials/Git/article.html#filterbranch_example)

The following command extracts a directory from a Git repository and retains all commits for this subfolder.

```
git filter-branch --prune-empty --subdirectory-filter FOLDER-NAME  BRANCH-NAME
```

The following command replaces the email address of one author from all commits.

```
git filter-branch -f \
--env-filter 'if [ "$GIT_AUTHOR_NAME" = "Lars Vogel" ]; then \
GIT_AUTHOR_EMAIL="lars.vogel@gmail.com"; fi' HEAD)
```

### [48. Working with patch files](https://www.vogella.com/tutorials/Git/article.html#working-with-patch-files)

#### [48.1. What is a patch file?](https://www.vogella.com/tutorials/Git/article.html#gitpatch)

A _patch_ is a text file that contains changes to other text files in a standarized format. A patch created with the `git format-patch` command includes meta-information about the commit (committer, date, commit message, etc) and also contains the changes introduced in binary data in the commit.

This file can be sent to someone else and the receiver can use it to apply the changes to his local repository. The metadata is preserved.

Alternatively you could create a diff file with the `git diff` command, but this diff file does not contain the metadata information.

#### [48.2. Create and apply patches](https://www.vogella.com/tutorials/Git/article.html#gitpatch_createandapply)

The following example creates a branch, changes several files and creates a commit recording these changes.

```
# create a new branch
git branch mybranch
# use this new branch
git checkout mybranch
# make some changes
touch test05
# change some content in an existing file
echo "new content for test01" >test01
# commit this to the branch
git add .
git commit -m "first commit in the branch"
```

The next example creates a patch for these changes.

```
# creates a patch --> git format-patch master
git format-patch origin/master

# this creates the file:
# patch 0001-First-commit-in-the-branch.patch
```

To apply this patch to your master branch in a different clone of the repository, switch to it and use the `git apply` command.

```
# switch to the master branch
git checkout master

# apply the patch
git apply 0001-First-commit-in-the-branch.patch
```

Afterwards you can commit the changes introduced by the patches and delete the patch file.

```
# patch is applied to master
# change can be committed
git add .
git commit -m "apply patch"

# delete the patch file
rm 0001-First-commit-in-the-branch.patch
```

Use the `git am` command to apply and commit the changes in a single step. To apply and commit all patch files in the directory use, for example, the `git am *.patch` command. You specify the order in which the patches are applied by specifying them on the command line.

#### [48.3. Create a patch for a selected commit](https://www.vogella.com/tutorials/Git/article.html#gitpatch_createforcommit)

You can specify the commit ID and the number of patches which should be created. For example, to create a patch for selected commits based on the HEAD pointer you can use the following commands.

```
# create patch for the last commit based on HEAD
git format-patch -1 HEAD

# create a patch series for the last three commits
# based on head
git format-patch -3 HEAD
```

### [49. Git commit and other hooks](https://www.vogella.com/tutorials/Git/article.html#gitcommithooks)

#### [49.1. Usage of Git hooks](https://www.vogella.com/tutorials/Git/article.html#gitcommithooks_intro)

Git provides commit hooks, e.g., programs which can be executed at a pre-defined point during the work with the repository. For example, you can ensure that the commit message has a certain format or trigger an action after a push to the server.

These programs are usually scripts and can be written in any language, e.g., as shell scripts or in Perl, Python etc. You can also implement a hook, for example, in C and use the resulting executables. Git calls the scripts based on a naming convention.

#### [49.2. Client and server side commit hooks](https://www.vogella.com/tutorials/Git/article.html#gitcommithooks_clientserver)

Git provides hooks for the client and for the server side. On the server side you can use the `pre-receive` and `post-receive` script to check the input or to trigger actions after the commit. The usage of a server commit hook requires that you have access to the server. Hosting providers like GitHub or Bitbucket do not offer this access.

If you create a new Git repository, Git creates example scripts in the `.git/hooks` directory. The example scripts end with `.sample`. To activate them make them executable and remove the `.sample` from the filename.

#### [49.3. Restrictions](https://www.vogella.com/tutorials/Git/article.html#gitcommithooks_restrictions)

Not all Git server implementations support server side commit hooks. Local hooks in the local repository can be removed by the developer.

### [50. Handling line endings on different platforms](https://www.vogella.com/tutorials/Git/article.html#line_feedendings)

#### [50.1. Line endings of the different platforms](https://www.vogella.com/tutorials/Git/article.html#line_feedendings_platform)

Every time a developer presses return on the keyboard an invisible character called a line ending is inserted. Unfortunately, different operating systems handle line endings differently.

Linux and Mac use different line endings than Windows. Windows uses a carriage-return and a linefeed character (CRLF), while Linux and Mac only uses a linefeed character (LF). This becomes a problem if developers use different operating system to commit changes to a Git repository.

To avoid commits because of line ending differences in your Git repository you should configure all clients to write the same line ending to the Git repository.

#### [50.2. Configuring line ending settings as developer](https://www.vogella.com/tutorials/Git/article.html#line_feedendings_convert)

On Windows systems you can tell Git to convert line endings during a checkout to CRLF and to convert them back to LF during commit. Use the following setting for this.

```
# configure Git on Windows to properly handle line endings
git config --global core.autocrlf true
```

On Linux and Mac you can tell Git to convert CRLF to LF with the following setting.

```
# configure Git on Linux and Mac to properly handle line endings
git config --global core.autocrlf input
```

#### [50.3. Configuring line ending settings per repository](https://www.vogella.com/tutorials/Git/article.html#line_feedendings_gitattributes)

You can also configure the line ending handling per repository by adding a special `.gitattributes` file to the root folder of your Git repository. If this file is committed to the repository, it overrides the `core.autocrlf` setting of the individual developer.

In this file you can configure Git to auto detect the line endings.

### [51. Migrating from SVN](https://www.vogella.com/tutorials/Git/article.html#svn_migration)

To convert Subversion projects to Git you can use a RubyGem called _svn2git_. This tool relies on `git svn` internally and handles most of the trouble.

To install it (on Ubuntu) simply type:

```
sudo apt-get install git-svn ruby rubygems

sudo gem install svn2git
```

Let's say you have a repository called

http://svn.example.com/repo

with the default layout (trunk, branches, tags) and already prepared a local git repository where you want to put everything. Then navigate to your git directory and use the following commands:

```
svn2git http://svn.example.com/repo --verbose

svn2git --rebase
```

The parameter `--verbose` adds detailed output to the commandline so you can see what is going on including potential errors. The second `svn2git --rebase` command aligns your new git repository with the svn import. You are now ready to push to the web and get forked! If your svn layout deviates from the standard or other problems occur, seek `svn2git --help` for documentation on additional parameters.

### [52. Frequently asked questions](https://www.vogella.com/tutorials/Git/article.html#gitfaq)

#### [52.1. Can Git handle symlinks?](https://www.vogella.com/tutorials/Git/article.html#gitfaq_symlinks)

The usage of symlinks requires that the operating system used by the developers supports them.

Git as version control system can handle symlinks.

If the symlink points to a file, then Git stores the path information it is symlinking to, and the file type. This is similar to a symlink to a directory; Git does not store the contents under the symlinked directory.

### [53. Futher reading on Git](https://www.vogella.com/tutorials/Git/article.html#gitseries)

This tutorial is part of a series about the Git version control system. See the other tutorials for more information.

### [54. Appendix: The details of the commit objects](https://www.vogella.com/tutorials/Git/article.html#git)

#### [54.1. Commit object (commit)](https://www.vogella.com/tutorials/Git/article.html#commit_object)

Conceptually a commit object (short:commit) represents a version of all files tracked in the repository at the time the commit was created. Commits know their parent(s) and this way capture the version history of the repository.

#### [54.2. Technical details of a commit object](https://www.vogella.com/tutorials/Git/article.html#commit_objects)

This commit object is addressable via a hash ( _SHA-1 checksum_ ). This hash is calculated based on the content of the files, the content of the directories, the complete history of up to the new commit, the committer, the commit message, and several other factors.

This means that Git is safe, you cannot manipulate a file or the commit message in the Git repository without Git noticing that corresponding hash does not fit anymore to the content.

The _commit object_ points to the individual files in this commit via a _tree_ object. The files are stored in the Git repository as _blob_ objects and might be packed by Git for better performance and more compact storage. Blobs are addressed via their SHA-1 hash.

Packing involves storing changes as deltas, compression and storage of many objects in a single _pack file_. _Pack files_ are accompanied by one or multiple index files which speedup access to individual objects stored in these packs.

A commit object is depicted in the following picture.

![Commit object](https://www.vogella.com/tutorials/Git/img/commit_object.png)

The above picture is simplified. Tree objects point to other tree objects and file blobs. Objects which didn't change between commits are reused by multiple commits.

#### [54.3. Hash and abbreviated commit hash](https://www.vogella.com/tutorials/Git/article.html#commits_sha_checksum)

A Git commit object is identified by its hash (SHA-1 checksum). SHA-1 produces a 160-bit (20-byte) hash value. A SHA-1 hash value is typically rendered as a hexadecimal number, 40 digits long.

In a typical Git repository you need fewer characters to uniquely identify a commit object. This short form is called the abbreviated commit hash or abbreviated hash. Sometimes it is also called the shortened SHA-1 or abbreviated SHA-1.

Several commands, e.g., the `git log` command can be instructed to use the shortened SHA-1 for their output.

### [55. Commit references](https://www.vogella.com/tutorials/Git/article.html#commitreference)

#### [55.1. Predecessor commits, parents and commit references](https://www.vogella.com/tutorials/Git/article.html#commitreference_whatis)

Each commit has zero or more direct predecessor commits. The first commit has zero parents, merge commits have two or more parents, most commits have one parent.

![Commit reference overview](https://www.vogella.com/tutorials/Git/img/commitreference10.png)

In Git you frequently want to refer to certain commits. For example, you want to tell Git to show you all changes which were done in the last three commits. Or you want to see the differences introduced between two different branches.

Git allows addressing commits via _commit reference_ for this purpose.

A commit reference can be a _simple reference_ (simple ref), in this case it points directly to a commit. This is the case for a commit hash or a tag. A commit reference can also be _symbolic reference_ (symbolic ref, symref). In this case it points to another reference (either simple or symbolic). For example HEAD is a symbolic ref for a branch, if it points to a branch. HEAD points to the branch pointer and the branch pointer points to a commit.

#### [55.4. Using caret and tilde for commit references](https://www.vogella.com/tutorials/Git/article.html#commitreference_carettilde)

\[reference]\~1 describes the first predecessor of the commit object accessed via \[reference]. \[reference]\~2 is the first predecessor of the first predecessor of the \[reference] commit. \[reference]\~3 is the first predecessor of the first predecessor of the first predecessor of the \[reference] commit, etc.

\[reference]\~ is an abbreviation for \[reference]\~1.

For example, you can use the _HEAD\~1_ or _HEAD\~_ reference to access the first parent of the commit to which the _HEAD_ pointer currently points.

\[reference]^1 also describes the first predecessor of the commit object accessed via \[reference].

For example HEAD^ is the same as HEAD\~ and is the same as HEAD\~3.

The difference is that \[reference]^2 describes the second parent of a commit. A merge commit typically has two predecessors. HEAD^3 means ‘the third parent of a merge' and in most cases this won't exist (merges are generally between two commits, though more is possible).

![Commit reference pointer example](https://www.vogella.com/tutorials/Git/img/commitreference20.png)

\[reference]^ is an abbreviation for \[reference]^1.

#### [55.5. Commit ranges with the double dot operator](https://www.vogella.com/tutorials/Git/article.html#commit-ranges-with-the-double-dot-operator)

You can also specify ranges of commits. This is useful for certain Git commands, for example, for seeing the changes between a series of commits.

The double dot operator allows you to select all commits which are reachable from a commit c2 but not from commit c1. The syntax for this is `c1..c2`. A commit A is reachable from another commit B if A is a direct or indirect parent of B.

Think of c1..c2 as _all commits as of c1 (not including c1) until commit c2._

For example, you can ask Git to show all commits which happened between HEAD and HEAD\~4.

This also works for branches. To list all commits which are in the _master_ branch but not in the _testing_ branch, use the following command.

You can also list all commits which are in the _testing_ but not in the _master_ branch.

#### [55.6. Commit ranges with the triple dot operator](https://www.vogella.com/tutorials/Git/article.html#commit-ranges-with-the-triple-dot-operator)

The triple dot operator allows you to select all commits which are reachable either from commit c1 or commit c2 but not from both of them.

This is useful to show all commits in two branches which have not yet been combined.

```
# show all commits which
# can be reached by master or testing
# but not both
git log master...testing
```
