REACT
-
Create React AppAwesome ReactREACTHello World
The smallest React example looks like this:
It displays a heading saying "Hello, world!" on the page.
https://codepen.io/bgoonz/pen/wveBJBM
Click the link above to open an online editor. Feel free to make some changes, and see how they affect the output. Most pages in this guide will have editable examples like this one.
How to Read This Guide
In this guide, we will examine the building blocks of React apps: elements and components. Once you master them, you can create complex apps from small reusable pieces.
TipThis guide is designed for people who prefer learning concepts step by step. If you prefer to learn by doing, check out our practical tutorial. You might find this guide and the tutorial complementary to each other.
This is the first chapter in a step-by-step guide about main React concepts. You can find a list of all its chapters in the navigation sidebar. If you're reading this from a mobile device, you can access the navigation by pressing the button in the bottom right corner of your screen.
Every chapter in this guide builds on the knowledge introduced in earlier chapters. You can learn most of React by reading the "Main Concepts" guide chapters in the order they appear in the sidebar. For example, "Introducing JSX" is the next chapter after this one.
Knowledge Level Assumptions
React is a JavaScript library, and so we'll assume you have a basic understanding of the JavaScript language. If you don't feel very confident, we recommend going through a JavaScript tutorial to check your knowledge level and enable you to follow along this guide without getting lost. It might take you between 30 minutes and an hour, but as a result you won't have to feel like you're learning both React and JavaScript at the same time.
NoteThis guide occasionally uses some newer JavaScript syntax in the examples. If you haven't worked with JavaScript in the last few years, these three points should get you most of the way.
Introducing JSX
Consider this variable declaration:
This funny tag syntax is neither a string nor HTML.
It is called JSX, and it is a syntax extension to JavaScript. We recommend using it with React to describe what the UI should look like. JSX may remind you of a template language, but it comes with the full power of JavaScript.
JSX produces React "elements". We will explore rendering them to the DOM in the next section. Below, you can find the basics of JSX necessary to get you started.
Why JSX?
React embraces the fact that rendering logic is inherently coupled with other UI logic: how events are handled, how the state changes over time, and how the data is prepared for display.
Instead of artificially separating technologies by putting markup and logic in separate files, React separates concerns with loosely coupled units called "components" that contain both. We will come back to components in a further section, but if you're not yet comfortable putting markup in JS, this talk might convince you otherwise.
React doesn't require using JSX, but most people find it helpful as a visual aid when working with UI inside the JavaScript code. It also allows React to show more useful error and warning messages.
With that out of the way, let's get started!
Embedding Expressions in JSX
In the example below, we declare a variable called name and then use it inside JSX by wrapping it in curly braces:
You can put any valid JavaScript expression inside the curly braces in JSX. For example, 2 + 2, user.firstName, or formatName(user) are all valid JavaScript expressions.
In the example below, we embed the result of calling a JavaScript function, formatName(user), into an <h1> element.
https://codepen.io/bgoonz/pen/oNwgZgm
We split JSX over multiple lines for readability. While it isn't required, when doing this, we also recommend wrapping it in parentheses to avoid the pitfalls of automatic semicolon insertion.
JSX is an Expression Too
After compilation, JSX expressions become regular JavaScript function calls and evaluate to JavaScript objects.
This means that you can use JSX inside of if statements and for loops, assign it to variables, accept it as arguments, and return it from functions:
Specifying Attributes with JSX
You may use quotes to specify string literals as attributes:
You may also use curly braces to embed a JavaScript expression in an attribute:
Don't put quotes around curly braces when embedding a JavaScript expression in an attribute. You should either use quotes (for string values) or curly braces (for expressions), but not both in the same attribute.
Warning:Since JSX is closer to JavaScript than to HTML, React DOM uses camelCase property naming convention instead of HTML attribute names.For example, class becomes className in JSX, and tabindex becomes tabIndex.
Specifying Children with JSX
If a tag is empty, you may close it immediately with />, like XML:
JSX tags may contain children:
JSX Prevents Injection Attacks
It is safe to embed user input in JSX:
By default, React DOM escapes any values embedded in JSX before rendering them. Thus it ensures that you can never inject anything that's not explicitly written in your application. Everything is converted to a string before being rendered. This helps prevent XSS (cross-site-scripting) attacks.
JSX Represents Objects
Babel compiles JSX down to React.createElement() calls.
These two examples are identical:
React.createElement() performs a few checks to help you write bug-free code but essentially it creates an object like this:
These objects are called "React elements". You can think of them as descriptions of what you want to see on the screen. React reads these objects and uses them to construct the DOM and keep it up to date.
We will explore rendering React elements to the DOM in the next section.
Tip:We recommend using the "Babel" language definition for your editor of choice so that both ES6 and JSX code is properly highlighted.
Rendering Elements
Elements are the smallest building blocks of React apps.
An element describes what you want to see on the screen:
const element = <h1>Hello, world</h1>;
Unlike browser DOM elements, React elements are plain objects, and are cheap to create. React DOM takes care of updating the DOM to match the React elements.
Note:One might confuse elements with a more widely known concept of "components". We will introduce components in the next section. Elements are what components are "made of", and we encourage you to read this section before jumping ahead.
Rendering an Element into the DOM
Let's say there is a <div> somewhere in your HTML file:
We call this a "root" DOM node because everything inside it will be managed by React DOM.
Applications built with just React usually have a single root DOM node. If you are integrating React into an existing app, you may have as many isolated root DOM nodes as you like.
To render a React element into a root DOM node, pass both to [ReactDOM.render()](<https://reactjs.org/docs/react-dom.html#render>):
https://codepen.io/bgoonz/pen/mdwyWeb?editors=0010
It displays "Hello, world" on the page.
Updating the Rendered Element
React elements are immutable. Once you create an element, you can't change its children or attributes. An element is like a single frame in a movie: it represents the UI at a certain point in time.
With our knowledge so far, the only way to update the UI is to create a new element, and pass it to [ReactDOM.render()](<https://reactjs.org/docs/react-dom.html#render>).
Consider this ticking clock example:
https://codepen.io/bgoonz/pen/eYRmvNy?editors=0010
It calls [ReactDOM.render()](<https://reactjs.org/docs/react-dom.html#render>) every second from a [setInterval()](<https://developer.mozilla.org/en-US/docs/Web/API/WindowTimers/setInterval>) callback.
Note:In practice, most React apps only call ReactDOM.render() once. In the next sections we will learn how such code gets encapsulated into stateful components.We recommend that you don't skip topics because they build on each other.
React Only Updates What's Necessary
React DOM compares the element and its children to the previous one, and only applies the DOM updates necessary to bring the DOM to the desired state.
You can verify by inspecting the last example with the browser tools:
Even though we create an element describing the whole UI tree on every tick, only the text node whose contents have changed gets updated by React DOM.
In our experience, thinking about how the UI should look at any given moment, rather than how to change it over time, eliminates a whole class of bugs.
Components and Props
Components let you split the UI into independent, reusable pieces, and think about each piece in isolation. This page provides an introduction to the idea of components. You can find a detailed component API reference here.
Conceptually, components are like JavaScript functions. They accept arbitrary inputs (called "props") and return React elements describing what should appear on the screen.
Function and Class Components
The simplest way to define a component is to write a JavaScript function:
This function is a valid React component because it accepts a single "props" (which stands for properties) object argument with data and returns a React element. We call such components "function components" because they are literally JavaScript functions.
You can also use an ES6 class to define a component:
The above two components are equivalent from React's point of view.
Function and Class components both have some additional features that we will discuss in the next sections.
Rendering a Component
Previously, we only encountered React elements that represent DOM tags:
However, elements can also represent user-defined components:
When React sees an element representing a user-defined component, it passes JSX attributes and children to this component as a single object. We call this object "props".
For example, this code renders "Hello, Sara" on the page:
https://codepen.io/bgoonz/pen/QWgwpjd?editors=0010
Let's recap what happens in this example:
We call
ReactDOM.render()with the<Welcome name="Sara" />element.React calls the
Welcomecomponent with{name: 'Sara'}as the props.Our
Welcomecomponent returns a<h1>Hello, Sara</h1>element as the result.React DOM efficiently updates the DOM to match
<h1>Hello, Sara</h1>.
Note: Always start component names with a capital letter.React treats components starting with lowercase letters as DOM tags. For example, represents an HTML div tag, but represents a component and requires Welcome to be in scope.To learn more about the reasoning behind this convention, please read JSX In Depth.
Composing Components
Components can refer to other components in their output. This lets us use the same component abstraction for any level of detail. A button, a form, a dialog, a screen: in React apps, all those are commonly expressed as components.
For example, we can create an App component that renders Welcome many times:
https://codepen.io/bgoonz/pen/LYLEWNq?editors=0010
Typically, new React apps have a single App component at the very top. However, if you integrate React into an existing app, you might start bottom-up with a small component like Button and gradually work your way to the top of the view hierarchy.
Extracting Components
Don't be afraid to split components into smaller components.
For example, consider this Comment component:
https://codepen.io/bgoonz/pen/PojwpzP?editors=0010
It accepts author (an object), text (a string), and date (a date) as props, and describes a comment on a social media website.
This component can be tricky to change because of all the nesting, and it is also hard to reuse individual parts of it. Let's extract a few components from it.
First, we will extract Avatar:
The Avatar doesn't need to know that it is being rendered inside a Comment. This is why we have given its prop a more generic name: user rather than author.
We recommend naming props from the component's own point of view rather than the context in which it is being used.
We can now simplify Comment a tiny bit:
Next, we will extract a UserInfo component that renders an Avatar next to the user's name:
function UserInfo(props) { return ( <div className="UserInfo"> <Avatar user={props.user} /> <div className="UserInfo-name"> {props.user.name} </div> </div> ); }
This lets us simplify Comment even further:
https://codepen.io/bgoonz/pen/eYRmvzV?editors=0010
Extracting components might seem like grunt work at first, but having a palette of reusable components pays off in larger apps. A good rule of thumb is that if a part of your UI is used several times (Button, Panel, Avatar), or is complex enough on its own (App, FeedStory, Comment), it is a good candidate to be extracted to a separate component.
Props are Read-Only
Whether you declare a component as a function or a class, it must never modify its own props. Consider this sum function:
Such functions are called "pure" because they do not attempt to change their inputs, and always return the same result for the same inputs.
In contrast, this function is impure because it changes its own input:
React is pretty flexible but it has a single strict rule:
All React components must act like pure functions with respect to their props.
Of course, application UIs are dynamic and change over time. In the next section, we will introduce a new concept of "state". State allows React components to change their output over time in response to user actions, network responses, and anything else, without violating this rule.
State and Lifecycle
This page introduces the concept of state and lifecycle in a React component. You can find a detailed component API reference here.
Consider the ticking clock example from one of the previous sections. In Rendering Elements, we have only learned one way to update the UI. We call ReactDOM.render() to change the rendered output:
In this section, we will learn how to make the Clock component truly reusable and encapsulated. It will set up its own timer and update itself every second.
We can start by encapsulating how the clock looks:
https://codepen.io/bgoonz/pen/powvegw?editors=0010
However, it misses a crucial requirement: the fact that the Clock sets up a timer and updates the UI every second should be an implementation detail of the Clock.
Ideally we want to write this once and have the Clock update itself:
To implement this, we need to add "state" to the Clock component.
State is similar to props, but it is private and fully controlled by the component.
Converting a Function to a Class
You can convert a function component like Clock to a class in five steps:
Create an ES6 class, with the same name, that extends
React.Component.Add a single empty method to it called
render().Move the body of the function into the
render()method.Replace
propswiththis.propsin therender()body.Delete the remaining empty function declaration.
https://codepen.io/bgoonz/pen/eYRmvJV?editors=0010
Clock is now defined as a class rather than a function.
The render method will be called each time an update happens, but as long as we render <Clock /> into the same DOM node, only a single instance of the Clock class will be used. This lets us use additional features such as local state and lifecycle methods.
Adding Local State to a Class
We will move the date from props to state in three steps:
Replace
this.props.datewiththis.state.datein therender()method:
Add a class constructor that assigns the initial
this.state:
Note how we pass props to the base constructor:
Class components should always call the base constructor with props.
Remove the
dateprop from the<Clock />element:
We will later add the timer code back to the component itself.
The result looks like this:
https://codepen.io/bgoonz/pen/oNwgZbV?editors=0010
Next, we'll make the Clock set up its own timer and update itself every second.
Adding Lifecycle Methods to a Class
In applications with many components, it's very important to free up resources taken by the components when they are destroyed.
We want to set up a timer whenever the Clock is rendered to the DOM for the first time. This is called "mounting" in React.
We also want to clear that timer whenever the DOM produced by the Clock is removed. This is called "unmounting" in React.
We can declare special methods on the component class to run some code when a component mounts and unmounts:
These methods are called "lifecycle methods".
The componentDidMount() method runs after the component output has been rendered to the DOM. This is a good place to set up a timer:
Note how we save the timer ID right on this (this.timerID).
While this.props is set up by React itself and this.state has a special meaning, you are free to add additional fields to the class manually if you need to store something that doesn't participate in the data flow (like a timer ID).
We will tear down the timer in the componentWillUnmount() lifecycle method:
Finally, we will implement a method called tick() that the Clock component will run every second.
It will use this.setState() to schedule updates to the component local state:
Now the clock ticks every second.
Let's quickly recap what's going on and the order in which the methods are called:
When
<Clock />is passed toReactDOM.render(), React calls the constructor of theClockcomponent. SinceClockneeds to display the current time, it initializesthis.statewith an object including the current time. We will later update this state.React then calls the
Clockcomponent'srender()method. This is how React learns what should be displayed on the screen. React then updates the DOM to match theClock's render output.When the
Clockoutput is inserted in the DOM, React calls thecomponentDidMount()lifecycle method. Inside it, theClockcomponent asks the browser to set up a timer to call the component'stick()method once a second.Every second the browser calls the
tick()method. Inside it, theClockcomponent schedules a UI update by callingsetState()with an object containing the current time. Thanks to thesetState()call, React knows the state has changed, and calls therender()method again to learn what should be on the screen. This time,this.state.datein therender()method will be different, and so the render output will include the updated time. React updates the DOM accordingly.If the
Clockcomponent is ever removed from the DOM, React calls thecomponentWillUnmount()lifecycle method so the timer is stopped.
Using State Correctly
There are three things you should know about setState().
Do Not Modify State Directly
For example, this will not re-render a component:
Instead, use setState():
The only place where you can assign this.state is the constructor.
State Updates May Be Asynchronous
React may batch multiple setState() calls into a single update for performance.
Because this.props and this.state may be updated asynchronously, you should not rely on their values for calculating the next state.
For example, this code may fail to update the counter:
To fix it, use a second form of setState() that accepts a function rather than an object. That function will receive the previous state as the first argument, and the props at the time the update is applied as the second argument:
We used an arrow function above, but it also works with regular functions:
State Updates are Merged
When you call setState(), React merges the object you provide into the current state.
For example, your state may contain several independent variables:
Then you can update them independently with separate setState() calls:
The merging is shallow, so this.setState({comments}) leaves this.state.posts intact, but completely replaces this.state.comments.
The Data Flows Down
Neither parent nor child components can know if a certain component is stateful or stateless, and they shouldn't care whether it is defined as a function or a class.
This is why state is often called local or encapsulated. It is not accessible to any component other than the one that owns and sets it.
A component may choose to pass its state down as props to its child components:
The FormattedDate component would receive the date in its props and wouldn't know whether it came from the Clock's state, from the Clock's props, or was typed by hand:
https://codepen.io/bgoonz/pen/GREgWEp?editors=0010
This is commonly called a "top-down" or "unidirectional" data flow. Any state is always owned by some specific component, and any data or UI derived from that state can only affect components "below" them in the tree.
If you imagine a component tree as a waterfall of props, each component's state is like an additional water source that joins it at an arbitrary point but also flows down.
To show that all components are truly isolated, we can create an App component that renders three <Clock>s:
https://codepen.io/bgoonz/pen/YzQPZQK?editors=0010
Each Clock sets up its own timer and updates independently.
In React apps, whether a component is stateful or stateless is considered an implementation detail of the component that may change over time. You can use stateless components inside stateful components, and vice versa.
Handling Events
Handling events with React elements is very similar to handling events on DOM elements. There are some syntax differences:
React events are named using camelCase, rather than lowercase.
With JSX you pass a function as the event handler, rather than a string.
For example, the HTML:
is slightly different in React:
Another difference is that you cannot return false to prevent default behavior in React. You must call preventDefault explicitly. For example, with plain HTML, to prevent the default form behavior of submitting, you can write:
In React, this could instead be:
Here, e is a synthetic event. React defines these synthetic events according to the W3C spec, so you don't need to worry about cross-browser compatibility. React events do not work exactly the same as native events. See the [SyntheticEvent](<https://reactjs.org/docs/events.html>) reference guide to learn more.
When using React, you generally don't need to call addEventListener to add listeners to a DOM element after it is created. Instead, just provide a listener when the element is initially rendered.
When you define a component using an ES6 class, a common pattern is for an event handler to be a method on the class. For example, this Toggle component renders a button that lets the user toggle between "ON" and "OFF" states:
You have to be careful about the meaning of this in JSX callbacks. In JavaScript, class methods are not bound by default. If you forget to bind this.handleClick and pass it to onClick, this will be undefined when the function is actually called.
This is not React-specific behavior; it is a part of how functions work in JavaScript. Generally, if you refer to a method without () after it, such as onClick={this.handleClick}, you should bind that method.
If calling bind annoys you, there are two ways you can get around this. If you are using the experimental public class fields syntax, you can use class fields to correctly bind callbacks:
This syntax is enabled by default in Create React App.
If you aren't using class fields syntax, you can use an arrow function in the callback:
The problem with this syntax is that a different callback is created each time the LoggingButton renders. In most cases, this is fine. However, if this callback is passed as a prop to lower components, those components might do an extra re-rendering. We generally recommend binding in the constructor or using the class fields syntax, to avoid this sort of performance problem.
Passing Arguments to Event Handlers
Inside a loop, it is common to want to pass an extra parameter to an event handler. For example, if id is the row ID, either of the following would work:
<button onClick={(e) => this.deleteRow(id, e)}>Delete Row</button><button onClick={this.deleteRow.bind(this, id)}>Delete Row</button>
The above two lines are equivalent, and use arrow functions and [Function.prototype.bind](<https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_objects/Function/bind>) respectively.
In both cases, the e argument representing the React event will be passed as a second argument after the ID. With an arrow function, we have to pass it explicitly, but with bind any further arguments are automatically forwarded.
Conditional Rendering
In React, you can create distinct components that encapsulate behavior you need. Then, you can render only some of them, depending on the state of your application.
Conditional rendering in React works the same way conditions work in JavaScript. Use JavaScript operators like [if](<https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Statements/if...else>) or the conditional operator to create elements representing the current state, and let React update the UI to match them.
Consider these two components:
We'll create a Greeting component that displays either of these components depending on whether a user is logged in:
https://codepen.io/bgoonz/pen/mdwyWmJ?editors=0011
This example renders a different greeting depending on the value of isLoggedIn prop.
Element Variables
You can use variables to store elements. This can help you conditionally render a part of the component while the rest of the output doesn't change.
Consider these two new components representing Logout and Login buttons:
In the example below, we will create a stateful component called LoginControl.
It will render either <LoginButton /> or <LogoutButton /> depending on its current state. It will also render a <Greeting /> from the previous example:
While declaring a variable and using an if statement is a fine way to conditionally render a component, sometimes you might want to use a shorter syntax. There are a few ways to inline conditions in JSX, explained below.
Inline If with Logical && Operator
You may embed expressions in JSX by wrapping them in curly braces. This includes the JavaScript logical && operator. It can be handy for conditionally including an element:
https://codepen.io/bgoonz/pen/VwWYppo?editors=0010
It works because in JavaScript, true && expression always evaluates to expression, and false && expression always evaluates to false.
Therefore, if the condition is true, the element right after && will appear in the output. If it is false, React will ignore and skip it.
Note that returning a falsy expression will still cause the element after && to be skipped but will return the falsy expression. In the example below, <div>0</div> will be returned by the render method.
Inline If-Else with Conditional Operator
Another method for conditionally rendering elements inline is to use the JavaScript conditional operator [condition ? true : false](<https://developer.mozilla.org/en/docs/Web/JavaScript/Reference/Operators/Conditional_Operator>).
In the example below, we use it to conditionally render a small block of text.
It can also be used for larger expressions although it is less obvious what's going on:
Just like in JavaScript, it is up to you to choose an appropriate style based on what you and your team consider more readable. Also remember that whenever conditions become too complex, it might be a good time to extract a component.
Preventing Component from Rendering
In rare cases you might want a component to hide itself even though it was rendered by another component. To do this return null instead of its render output.
In the example below, the <WarningBanner /> is rendered depending on the value of the prop called warn. If the value of the prop is false, then the component does not render:
Returning null from a component's render method does not affect the firing of the component's lifecycle methods. For instance componentDidUpdate will still be called.
Lists and Keys
First, let's review how you transform lists in JavaScript.
Given the code below, we use the [map()](<https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/map>) function to take an array of numbers and double their values. We assign the new array returned by map() to the variable doubled and log it:
This code logs [2, 4, 6, 8, 10] to the console.
In React, transforming arrays into lists of elements is nearly identical.
Rendering Multiple Components
You can build collections of elements and include them in JSX using curly braces {}.
Below, we loop through the numbers array using the JavaScript [map()](<https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/map>) function. We return a <li> element for each item. Finally, we assign the resulting array of elements to listItems:
We include the entire listItems array inside a <ul> element, and render it to the DOM:
https://codepen.io/bgoonz/pen/eYRmvvr?editors=0011
This code displays a bullet list of numbers between 1 and 5.
Basic List Component
Usually you would render lists inside a component.
We can refactor the previous example into a component that accepts an array of numbers and outputs a list of elements.
When you run this code, you'll be given a warning that a key should be provided for list items. A "key" is a special string attribute you need to include when creating lists of elements. We'll discuss why it's important in the next section.
Let's assign a key to our list items inside numbers.map() and fix the missing key issue.
https://codepen.io/bgoonz/pen/yLXyMMP?editors=0011
Keys
Keys help React identify which items have changed, are added, or are removed. Keys should be given to the elements inside the array to give the elements a stable identity:
The best way to pick a key is to use a string that uniquely identifies a list item among its siblings. Most often you would use IDs from your data as keys:
When you don't have stable IDs for rendered items, you may use the item index as a key as a last resort:
We don't recommend using indexes for keys if the order of items may change. This can negatively impact performance and may cause issues with component state. Check out Robin Pokorny's article for an in-depth explanation on the negative impacts of using an index as a key. If you choose not to assign an explicit key to list items then React will default to using indexes as keys.
Here is an in-depth explanation about why keys are necessary if you're interested in learning more.
Extracting Components with Keys
Keys only make sense in the context of the surrounding array.
For example, if you extract a ListItem component, you should keep the key on the <ListItem /> elements in the array rather than on the <li> element in the ListItem itself.
Example: Incorrect Key Usage
Example: Correct Key Usage
A good rule of thumb is that elements inside the map() call need keys.
Keys Must Only Be Unique Among Siblings
Keys used within arrays should be unique among their siblings. However, they don't need to be globally unique. We can use the same keys when we produce two different arrays:
https://codepen.io/bgoonz/pen/mdwyWWy?editors=0010
Keys serve as a hint to React but they don't get passed to your components. If you need the same value in your component, pass it explicitly as a prop with a different name:
With the example above, the Post component can read props.id, but not props.key.
Embedding map() in JSX
In the examples above we declared a separate listItems variable and included it in JSX:
JSX allows embedding any expression in curly braces so we could inline the map() result:
https://codepen.io/bgoonz/pen/JjJoWEw?editors=0010
Sometimes this results in clearer code, but this style can also be abused. Like in JavaScript, it is up to you to decide whether it is worth extracting a variable for readability. Keep in mind that if the map() body is too nested, it might be a good time to extract a component.
Forms
HTML form elements work a bit differently from other DOM elements in React, because form elements naturally keep some internal state. For example, this form in plain HTML accepts a single name:
This form has the default HTML form behavior of browsing to a new page when the user submits the form. If you want this behavior in React, it just works. But in most cases, it's convenient to have a JavaScript function that handles the submission of the form and has access to the data that the user entered into the form. The standard way to achieve this is with a technique called "controlled components".
Controlled Components
In HTML, form elements such as <input>, <textarea>, and <select> typically maintain their own state and update it based on user input. In React, mutable state is typically kept in the state property of components, and only updated with [setState()](<https://reactjs.org/docs/react-component.html#setstate>).
We can combine the two by making the React state be the "single source of truth". Then the React component that renders a form also controls what happens in that form on subsequent user input. An input form element whose value is controlled by React in this way is called a "controlled component".
For example, if we want to make the previous example log the name when it is submitted, we can write the form as a controlled component:
https://codepen.io/bgoonz/pen/rNwayjv?editors=0010
Since the value attribute is set on our form element, the displayed value will always be this.state.value, making the React state the source of truth. Since handleChange runs on every keystroke to update the React state, the displayed value will update as the user types.
With a controlled component, the input's value is always driven by the React state. While this means you have to type a bit more code, you can now pass the value to other UI elements too, or reset it from other event handlers.
The textarea Tag
In HTML, a <textarea> element defines its text by its children:
In React, a <textarea> uses a value attribute instead. This way, a form using a <textarea> can be written very similarly to a form that uses a single-line input:
Notice that this.state.value is initialized in the constructor, so that the text area starts off with some text in it.
The select Tag
In HTML, <select> creates a drop-down list. For example, this HTML creates a drop-down list of flavors:
<select><option value="grapefruit">Grapefruit</option><option value="lime">Lime</option><option selected value="coconut">Coconut</option><option value="mango">Mango</option></select>
Note that the Coconut option is initially selected, because of the selected attribute. React, instead of using this selected attribute, uses a value attribute on the root select tag. This is more convenient in a controlled component because you only need to update it in one place. For example:
Overall, this makes it so that <input type="text">, <textarea>, and <select> all work very similarly - they all accept a value attribute that you can use to implement a controlled component.
NoteYou can pass an array into the value attribute, allowing you to select multiple options in a select tag:
The file input Tag
In HTML, an <input type="file"> lets the user choose one or more files from their device storage to be uploaded to a server or manipulated by JavaScript via the File API.
<input type="file" />
Because its value is read-only, it is an uncontrolled component in React. It is discussed together with other uncontrolled components later in the documentation.
Handling Multiple Inputs
When you need to handle multiple controlled input elements, you can add a name attribute to each element and let the handler function choose what to do based on the value of event.target.name.
For example:
Note how we used the ES6 computed property name syntax to update the state key corresponding to the given input name:
It is equivalent to this ES5 code:
Also, since setState() automatically merges a partial state into the current state, we only needed to call it with the changed parts.
Controlled Input Null Value
Specifying the value prop on a controlled component prevents the user from changing the input unless you desire so. If you've specified a value but the input is still editable, you may have accidentally set value to undefined or null.
The following code demonstrates this. (The input is locked at first but becomes editable after a short delay.)
Alternatives to Controlled Components
It can sometimes be tedious to use controlled components, because you need to write an event handler for every way your data can change and pipe all of the input state through a React component. This can become particularly annoying when you are converting a preexisting codebase to React, or integrating a React application with a non-React library. In these situations, you might want to check out uncontrolled components, an alternative technique for implementing input forms.
Fully-Fledged Solutions
If you're looking for a complete solution including validation, keeping track of the visited fields, and handling form submission, Formik is one of the popular choices. However, it is built on the same principles of controlled components and managing state --- so don't neglect to learn them.
Lifting State Up
Often, several components need to reflect the same changing data. We recommend lifting the shared state up to their closest common ancestor. Let's see how this works in action.
In this section, we will create a temperature calculator that calculates whether the water would boil at a given temperature.
We will start with a component called BoilingVerdict. It accepts the celsius temperature as a prop, and prints whether it is enough to boil the water:
Next, we will create a component called Calculator. It renders an <input> that lets you enter the temperature, and keeps its value in this.state.temperature.
Additionally, it renders the BoilingVerdict for the current input value.
https://codepen.io/bgoonz/pen/zYzxZoL?editors=0010
Adding a Second Input
Our new requirement is that, in addition to a Celsius input, we provide a Fahrenheit input, and they are kept in sync.
We can start by extracting a TemperatureInput component from Calculator. We will add a new scale prop to it that can either be "c" or "f":
We can now change the Calculator to render two separate temperature inputs:
https://codepen.io/bgoonz/pen/QWgwpGv?editors=0010
We have two inputs now, but when you enter the temperature in one of them, the other doesn't update. This contradicts our requirement: we want to keep them in sync.
We also can't display the BoilingVerdict from Calculator. The Calculator doesn't know the current temperature because it is hidden inside the TemperatureInput.
Writing Conversion Functions
First, we will write two functions to convert from Celsius to Fahrenheit and back:
These two functions convert numbers. We will write another function that takes a string temperature and a converter function as arguments and returns a string. We will use it to calculate the value of one input based on the other input.
It returns an empty string on an invalid temperature, and it keeps the output rounded to the third decimal place:
For example, tryConvert('abc', toCelsius) returns an empty string, and tryConvert('10.22', toFahrenheit) returns '50.396'.
Lifting State Up
Currently, both TemperatureInput components independently keep their values in the local state:
However, we want these two inputs to be in sync with each other. When we update the Celsius input, the Fahrenheit input should reflect the converted temperature, and vice versa.
In React, sharing state is accomplished by moving it up to the closest common ancestor of the components that need it. This is called "lifting state up". We will remove the local state from the TemperatureInput and move it into the Calculator instead.
If the Calculator owns the shared state, it becomes the "source of truth" for the current temperature in both inputs. It can instruct them both to have values that are consistent with each other. Since the props of both TemperatureInput components are coming from the same parent Calculator component, the two inputs will always be in sync.
Let's see how this works step by step.
First, we will replace this.state.temperature with this.props.temperature in the TemperatureInput component. For now, let's pretend this.props.temperature already exists, although we will need to pass it from the Calculator in the future:
We know that props are read-only. When the temperature was in the local state, the TemperatureInput could just call this.setState() to change it. However, now that the temperature is coming from the parent as a prop, the TemperatureInput has no control over it.
In React, this is usually solved by making a component "controlled". Just like the DOM <input> accepts both a value and an onChange prop, so can the custom TemperatureInput accept both temperature and onTemperatureChange props from its parent Calculator.
Now, when the TemperatureInput wants to update its temperature, it calls this.props.onTemperatureChange:
Note:There is no special meaning to either temperature or onTemperatureChange prop names in custom components. We could have called them anything else, like name them value and onChange which is a common convention.
The onTemperatureChange prop will be provided together with the temperature prop by the parent Calculator component. It will handle the change by modifying its own local state, thus re-rendering both inputs with the new values. We will look at the new Calculator implementation very soon.
Before diving into the changes in the Calculator, let's recap our changes to the TemperatureInput component. We have removed the local state from it, and instead of reading this.state.temperature, we now read this.props.temperature. Instead of calling this.setState() when we want to make a change, we now call this.props.onTemperatureChange(), which will be provided by the Calculator:
Now let's turn to the Calculator component.
We will store the current input's temperature and scale in its local state. This is the state we "lifted up" from the inputs, and it will serve as the "source of truth" for both of them. It is the minimal representation of all the data we need to know in order to render both inputs.
For example, if we enter 37 into the Celsius input, the state of the Calculator component will be:
If we later edit the Fahrenheit field to be 212, the state of the Calculator will be:
We could have stored the value of both inputs but it turns out to be unnecessary. It is enough to store the value of the most recently changed input, and the scale that it represents. We can then infer the value of the other input based on the current temperature and scale alone.
The inputs stay in sync because their values are computed from the same state:
Now, no matter which input you edit, this.state.temperature and this.state.scale in the Calculator get updated. One of the inputs gets the value as is, so any user input is preserved, and the other input value is always recalculated based on it.
Let's recap what happens when you edit an input:
React calls the function specified as
onChangeon the DOM<input>. In our case, this is thehandleChangemethod in theTemperatureInputcomponent.The
handleChangemethod in theTemperatureInputcomponent callsthis.props.onTemperatureChange()with the new desired value. Its props, includingonTemperatureChange, were provided by its parent component, theCalculator.When it previously rendered, the
Calculatorhad specified thatonTemperatureChangeof the CelsiusTemperatureInputis theCalculator'shandleCelsiusChangemethod, andonTemperatureChangeof the FahrenheitTemperatureInputis theCalculator'shandleFahrenheitChangemethod. So either of these twoCalculatormethods gets called depending on which input we edited.Inside these methods, the
Calculatorcomponent asks React to re-render itself by callingthis.setState()with the new input value and the current scale of the input we just edited.React calls the
Calculatorcomponent'srendermethod to learn what the UI should look like. The values of both inputs are recomputed based on the current temperature and the active scale. The temperature conversion is performed here.React calls the
rendermethods of the individualTemperatureInputcomponents with their new props specified by theCalculator. It learns what their UI should look like.React calls the
rendermethod of theBoilingVerdictcomponent, passing the temperature in Celsius as its props.React DOM updates the DOM with the boiling verdict and to match the desired input values. The input we just edited receives its current value, and the other input is updated to the temperature after conversion.
Every update goes through the same steps so the inputs stay in sync.
Lessons Learned
There should be a single "source of truth" for any data that changes in a React application. Usually, the state is first added to the component that needs it for rendering. Then, if other components also need it, you can lift it up to their closest common ancestor. Instead of trying to sync the state between different components, you should rely on the top-down data flow.
Lifting state involves writing more "boilerplate" code than two-way binding approaches, but as a benefit, it takes less work to find and isolate bugs. Since any state "lives" in some component and that component alone can change it, the surface area for bugs is greatly reduced. Additionally, you can implement any custom logic to reject or transform user input.
If something can be derived from either props or state, it probably shouldn't be in the state. For example, instead of storing both celsiusValue and fahrenheitValue, we store just the last edited temperature and its scale. The value of the other input can always be calculated from them in the render() method. This lets us clear or apply rounding to the other field without losing any precision in the user input.
When you see something wrong in the UI, you can use React Developer Tools to inspect the props and move up the tree until you find the component responsible for updating the state. This lets you trace the bugs to their source:
Composition vs Inheritance
React has a powerful composition model, and we recommend using composition instead of inheritance to reuse code between components.
In this section, we will consider a few problems where developers new to React often reach for inheritance, and show how we can solve them with composition.
Containment
Some components don't know their children ahead of time. This is especially common for components like Sidebar or Dialog that represent generic "boxes".
We recommend that such components use the special children prop to pass children elements directly into their output:
This lets other components pass arbitrary children to them by nesting the JSX:
Anything inside the <FancyBorder> JSX tag gets passed into the FancyBorder component as a children prop. Since FancyBorder renders {props.children} inside a <div>, the passed elements appear in the final output.
While this is less common, sometimes you might need multiple "holes" in a component. In such cases you may come up with your own convention instead of using children:
React elements like <Contacts /> and <Chat /> are just objects, so you can pass them as props like any other data. This approach may remind you of "slots" in other libraries but there are no limitations on what you can pass as props in React.
Specialization
Sometimes we think about components as being "special cases" of other components. For example, we might say that a WelcomeDialog is a special case of Dialog.
In React, this is also achieved by composition, where a more "specific" component renders a more "generic" one and configures it with props:
Composition works equally well for components defined as classes:
So What About Inheritance?
At Facebook, we use React in thousands of components, and we haven't found any use cases where we would recommend creating component inheritance hierarchies.
Props and composition give you all the flexibility you need to customize a component's look and behavior in an explicit and safe way. Remember that components may accept arbitrary props, including primitive values, React elements, or functions.
If you want to reuse non-UI functionality between components, we suggest extracting it into a separate JavaScript module. The components may import it and use that function, object, or a class, without extending it.
Thinking in React
React is, in our opinion, the premier way to build big, fast Web apps with JavaScript. It has scaled very well for us at Facebook and Instagram.
One of the many great parts of React is how it makes you think about apps as you build them. In this document, we'll walk you through the thought process of building a searchable product data table using React.
Start With A Mock
Imagine that we already have a JSON API and a mock from our designer. The mock looks like this:
Our JSON API returns some data that looks like this:
Step 1: Break The UI Into A Component Hierarchy
The first thing you'll want to do is to draw boxes around every component (and subcomponent) in the mock and give them all names. If you're working with a designer, they may have already done this, so go talk to them! Their Photoshop layer names may end up being the names of your React components!
But how do you know what should be its own component? Use the same techniques for deciding if you should create a new function or object. One such technique is the single responsibility principle, that is, a component should ideally only do one thing. If it ends up growing, it should be decomposed into smaller subcomponents.
Since you're often displaying a JSON data model to a user, you'll find that if your model was built correctly, your UI (and therefore your component structure) will map nicely. That's because UI and data models tend to adhere to the same information architecture. Separate your UI into components, where each component matches one piece of your data model.
You'll see here that we have five components in our app. We've italicized the data each component represents.
FilterableProductTable(orange): contains the entirety of the exampleSearchBar(blue): receives all user inputProductTable(green): displays and filters the data collection based on user inputProductCategoryRow(turquoise): displays a heading for each categoryProductRow(red): displays a row for each product
If you look at ProductTable, you'll see that the table header (containing the "Name" and "Price" labels) isn't its own component. This is a matter of preference, and there's an argument to be made either way. For this example, we left it as part of ProductTable because it is part of rendering the data collection which is ProductTable's responsibility. However, if this header grows to be complex (e.g., if we were to add affordances for sorting), it would certainly make sense to make this its own ProductTableHeader component.
Now that we've identified the components in our mock, let's arrange them into a hierarchy. Components that appear within another component in the mock should appear as a child in the hierarchy:
FilterableProductTableSearchBarProductTableProductCategoryRowProductRow
Step 2: Build A Static Version in React
See the Pen Thinking In React: Step 2 on CodePen.
Now that you have your component hierarchy, it's time to implement your app. The easiest way is to build a version that takes your data model and renders the UI but has no interactivity. It's best to decouple these processes because building a static version requires a lot of typing and no thinking, and adding interactivity requires a lot of thinking and not a lot of typing. We'll see why.
To build a static version of your app that renders your data model, you'll want to build components that reuse other components and pass data using props. props are a way of passing data from parent to child. If you're familiar with the concept of state, don't use state at all to build this static version. State is reserved only for interactivity, that is, data that changes over time. Since this is a static version of the app, you don't need it.
You can build top-down or bottom-up. That is, you can either start with building the components higher up in the hierarchy (i.e. starting with FilterableProductTable) or with the ones lower in it (ProductRow). In simpler examples, it's usually easier to go top-down, and on larger projects, it's easier to go bottom-up and write tests as you build.
At the end of this step, you'll have a library of reusable components that render your data model. The components will only have render() methods since this is a static version of your app. The component at the top of the hierarchy (FilterableProductTable) will take your data model as a prop. If you make a change to your underlying data model and call ReactDOM.render() again, the UI will be updated. You can see how your UI is updated and where to make changes. React's one-way data flow (also called one-way binding) keeps everything modular and fast.
Refer to the React docs if you need help executing this step.
A Brief Interlude: Props vs State
There are two types of "model" data in React: props and state. It's important to understand the distinction between the two; skim the official React docs if you aren't sure what the difference is. See also FAQ: What is the difference between state and props?
Step 3: Identify The Minimal (but complete) Representation Of UI State
To make your UI interactive, you need to be able to trigger changes to your underlying data model. React achieves this with state.
To build your app correctly, you first need to think of the minimal set of mutable state that your app needs. The key here is DRY: Don't Repeat Yourself. Figure out the absolute minimal representation of the state your application needs and compute everything else you need on-demand. For example, if you're building a TODO list, keep an array of the TODO items around; don't keep a separate state variable for the count. Instead, when you want to render the TODO count, take the length of the TODO items array.
Think of all the pieces of data in our example application. We have:
The original list of products
The search text the user has entered
The value of the checkbox
The filtered list of products
Let's go through each one and figure out which one is state. Ask three questions about each piece of data:
Is it passed in from a parent via props? If so, it probably isn't state.
Does it remain unchanged over time? If so, it probably isn't state.
Can you compute it based on any other state or props in your component? If so, it isn't state.
The original list of products is passed in as props, so that's not state. The search text and the checkbox seem to be state since they change over time and can't be computed from anything. And finally, the filtered list of products isn't state because it can be computed by combining the original list of products with the search text and value of the checkbox.
So finally, our state is:
The search text the user has entered
The value of the checkbox
Step 4: Identify Where Your State Should Live
See the Pen Thinking In React: Step 4 on CodePen.
OK, so we've identified what the minimal set of app state is. Next, we need to identify which component mutates, or owns, this state.
Remember: React is all about one-way data flow down the component hierarchy. It may not be immediately clear which component should own what state. This is often the most challenging part for newcomers to understand, so follow these steps to figure it out:
For each piece of state in your application:
Identify every component that renders something based on that state.
Find a common owner component (a single component above all the components that need the state in the hierarchy).
Either the common owner or another component higher up in the hierarchy should own the state.
If you can't find a component where it makes sense to own the state, create a new component solely for holding the state and add it somewhere in the hierarchy above the common owner component.
Let's run through this strategy for our application:
ProductTableneeds to filter the product list based on state andSearchBarneeds to display the search text and checked state.The common owner component is
FilterableProductTable.It conceptually makes sense for the filter text and checked value to live in
FilterableProductTable
Cool, so we've decided that our state lives in FilterableProductTable. First, add an instance property this.state = {filterText: '', inStockOnly: false} to FilterableProductTable's constructor to reflect the initial state of your application. Then, pass filterText and inStockOnly to ProductTable and SearchBar as a prop. Finally, use these props to filter the rows in ProductTable and set the values of the form fields in SearchBar.
You can start seeing how your application will behave: set filterText to "ball" and refresh your app. You'll see that the data table is updated correctly.
Step 5: Add Inverse Data Flow
See the Pen Thinking In React: Step 5 on CodePen.
So far, we've built an app that renders correctly as a function of props and state flowing down the hierarchy. Now it's time to support data flowing the other way: the form components deep in the hierarchy need to update the state in FilterableProductTable.
React makes this data flow explicit to help you understand how your program works, but it does require a little more typing than traditional two-way data binding.
If you try to type or check the box in the current version of the example, you'll see that React ignores your input. This is intentional, as we've set the value prop of the input to always be equal to the state passed in from FilterableProductTable.
Let's think about what we want to happen. We want to make sure that whenever the user changes the form, we update the state to reflect the user input. Since components should only update their own state, FilterableProductTable will pass callbacks to SearchBar that will fire whenever the state should be updated. We can use the onChange event on the inputs to be notified of it. The callbacks passed by FilterableProductTable will call setState(), and the app will be updated.
And That's It
Hopefully, this gives you an idea of how to think about building components and applications with React. While it may be a little more typing than you're used to, remember that code is read far more than it's written, and it's less difficult to read this modular, explicit code. As you start to build large libraries of components, you'll appreciate this explicitness and modularity, and with code reuse, your lines of code will start to shrink. :)
This appendix is a non-exhaustive list of new syntactic features and methods that were added to JavaScript in ES6. These features are the most commonly used and most helpful.
While this appendix doesn't cover ES6 classes, we go over the basics while learning about components in the book. In addition, this appendix doesn't include descriptions of some larger new features like promises and generators. If you'd like more info on those or on any topic below, we encourage you to reference the Mozilla Developer Network's website (MDN).
Prefer const and let over var
const and let over varIf you've worked with ES5 JavaScript before, you're likely used to seeing variables declared with var:
Both the const and let statements also declare variables. They were introduced in ES6.
Use const in cases where a variable is never re-assigned. Using const makes this clear to whoever is reading your code. It refers to the "constant" state of the variable in the context it is defined within.
If the variable will be re-assigned, use let.
We encourage the use of const and let instead of var. In addition to the restriction introduced by const, both const and let are block scoped as opposed to function scoped. This scoping can help avoid unexpected bugs.
Arrow functions
There are three ways to write arrow function bodies. For the examples below, let's say we have an array of city objects:
If we write an arrow function that spans multiple lines, we must use braces to delimit the function body like this:
Note that we must also explicitly specify a return for the function.
However, if we write a function body that is only a single line (or single expression) we can use parentheses to delimit it:
Notably, we don't use return as it's implied.
Furthermore, if your function body is terse you can write it like so:
The terseness of arrow functions is one of two reasons that we use them. Compare the one-liner above to this:
Of greater benefit, though, is how arrow functions bind the this object.
The traditional JavaScript function declaration syntax (function () {}) will bind this in anonymous functions to the global object. To illustrate the confusion this causes, consider the following example:
The method printSongs() iterates over this.songs with forEach(). In this context, this is bound to the object (jukebox) as expected. However, the anonymous function passed to forEach() binds its internal this to the global object. As such, this.printSong(song) calls the function declared at the top of the example, not the method on jukebox.
JavaScript developers have traditionally used workarounds for this behavior, but arrow functions solve the problem by capturing the this value of the enclosing context. Using an arrow function for printSongs() has the expected result:
For this reason, throughout the book we use arrow functions for all anonymous functions.
Modules
ES6 formally supports modules using the import/export syntax.
Named exports
Inside any file, you can use export to specify a variable the module should expose. Here's an example of a file that exports two functions:
Now, anywhere we wanted to use these functions we could use import. We need to specify which functions we want to import. A common way of doing this is using ES6's destructuring assignment syntax to list them out like this:
Importantly, the function that was not exported (saySomething) is unavailable outside of the module.
Also note that we supply a relative path to from, indicating that the ES6 module is a local file as opposed to an npm package.
Instead of inserting an export before each variable you'd like to export, you can use this syntax to list off all the exposed variables in one area:
We can also specify that we'd like to import all of a module's functionality underneath a given namespace with the import * as <Namespace> syntax:
Default export
The other type of export is a default export. A module can only contain one default export:
This is a common pattern for libraries. It means you can easily import the library wholesale without specifying what individual functions you want:
It's not uncommon for a module to use a mix of both named exports and default exports. For instance, with react-dom, you can import ReactDOM (a default export) like this:
Or, if you're only going to use the render() function, you can import the named render() function like this:
To achieve this flexibility, the export implementation for react-dom looks something like this:
If you want to play around with the module syntax, check out the folder code/webpack/es6-modules.
For more reading on ES6 modules, see this article from Mozilla: "ES6 in Depth: Modules".
Object.assign()
Object.assign()We use Object.assign() often throughout the book. We use it in areas where we want to create a modified version of an existing object.
Object.assign() accepts any number of objects as arguments. When the function receives two arguments, it copies the properties of the second object onto the first, like so:
It is idiomatic to pass in three arguments to Object.assign(). The first argument is a new JavaScript object, the one that Object.assign() will ultimately return. The second is the object whose properties we'd like to build off of. The last is the changes we'd like to apply:
Object.assign() is a handy method for working with "immutable" JavaScript objects.
Template literals
In ES5 JavaScript, you'd interpolate variables into strings like this:
With ES6 template literals, we can create the same string like this:
The spread operator (...)
...)In arrays, the ellipsis ... operator will expand the array that follows into the parent array. The spread operator enables us to succinctly construct new arrays as a composite of existing arrays.
Here is an example:
Notice how this is different than if we wrote:
Enhanced object literals
In ES5, all objects were required to have explicit key and value declarations:
In ES6, you can use this terser syntax whenever the property name and variable name are the same:
Lots of open source libraries use this syntax, so it's good to be familiar with it. But whether you use it in your own code is a matter of stylistic preference.
Default arguments
With ES6, you can specify a default value for an argument in the case that it is undefined when the function is called.
This:
Can be written as this:
In both cases, using the function looks like this:
Whenever the argument b in the example above is undefined, the default argument is used. Note that null will not use the default argument:
Destructuring assignments
For arrays
In ES5, extracting and assigning multiple elements from an array looked like this:
In ES6, we can use the destructuring syntax to accomplish the same task like this:
The variables in the array on the left are "matched" and assigned to the corresponding elements in the array on the right. Note that 'onion' is ignored and has no variable bound to it.
For objects
We can do something similar for extracting object properties into variables:
Parameter context matching
We can use these same principles to bind arguments inside a function to properties of an object supplied as an argument:
We do this often with functional React components:
Here, we use destructuring to extract the props into variables (ingredients and onClick) that we then use inside the component's function body.
React.js cheatsheet
React.Component · render() · componentDidMount() · props/state · dangerouslySetInnerHTML · React is a JavaScript library for building user interfaces. This guide targets React v15 to v16.
React is a JavaScript library for building user interfaces. This guide targets React v15 to v16.
React Cheat Sheet
render
constructor
componentWillMount
componentDidMount
componentWillReceiveProps
shouldComponentUpdate
componentWillUpdate
✖ this.setState
componentDidUpdate
componentWillUnmount
setState (function)
setState (object)
setState (optional callback)
forceUpdate
displayName
defaultProps
Children.map
Children.forEach
Children.count
Children.only
Children.toArray
Context (example)
contextTypes
childContextTypes
getChildContext
#Components
Components
Use the React.js jsfiddle to start hacking. (or the unofficial jsbin)
Import multiple exports
Properties
Use this.props to access properties passed to the component.
See: Properties
States
Use states (this.state) to manage dynamic data.
With Babel you can use proposal-class-fields and get rid of constructor
See: States
Nesting
As of React v16.2.0, fragments can be used to return multiple children without adding extra wrapping nodes to the DOM.
Nest components to separate concerns.
See: Composing Components
Children
Children are passed as the children property.
#Defaults
Setting default props
See: defaultProps
Setting default state
Set the default state in the constructor().
And without constructor using Babel with proposal-class-fields.
See: Setting the default state
#Other components
Functional components
Functional components have no state. Also, their props are passed as the first parameter to a function.
See: Function and Class Components
Pure components
Performance-optimized version of React.Component. Doesn’t rerender if props/state hasn’t changed.
See: Pure components
Component API
These methods and properties are available for Component instances.
See: Component API
#Lifecycle
Mounting
Set initial the state on constructor(). Add DOM event handlers, timers (etc) on componentDidMount(), then remove them on componentWillUnmount().
Updating
componentDidUpdate (prevProps, prevState, snapshot)
Use setState() here, but remember to compare props
shouldComponentUpdate (newProps, newState)
Skips render() if returns false
render()
Render
componentDidUpdate (prevProps, prevState)
Operate on the DOM here
Called when parents change properties and .setState(). These are not called for initial renders.
See: Component specs
#Hooks (New)
State Hook
Hooks are a new addition in React 16.8.
See: Hooks at a Glance
Declaring multiple state variables
Effect hook
If you’re familiar with React class lifecycle methods, you can think of useEffect Hook as componentDidMount, componentDidUpdate, and componentWillUnmount combined.
By default, React runs the effects after every render — including the first render.
Building your own hooks
Define FriendStatus
Effects may also optionally specify how to “clean up” after them by returning a function.
Use FriendStatus
Hooks API Reference
Also see: Hooks FAQ
Basic Hooks
useState(initialState)
useEffect(() => { … })
useContext(MyContext)
value returned from React.createContext
Full details: Basic Hooks
Additional Hooks
useReducer(reducer, initialArg, init)
useCallback(() => { … })
useMemo(() => { … })
useRef(initialValue)
useImperativeHandle(ref, () => { … })
useLayoutEffect
identical to useEffect, but it fires synchronously after all DOM mutations
useDebugValue(value)
display a label for custom hooks in React DevTools
Full details: Additional Hooks
#DOM nodes
References
Allows access to DOM nodes.
See: Refs and the DOM
DOM Events
Pass functions to attributes like onChange.
See: Events
#Other features
Transferring props
Propagates src="..." down to the sub-component.
Top-level API
There are more, but these are most common.
See: React top-level API
#JSX patterns
Style shorthand
See: Inline styles
Inner HTML
See: Dangerously set innerHTML
Lists
Always supply a key property.
Conditionals
Short-circuit evaluation
#New features
Returning multiple elements
You can return multiple elements as arrays or fragments.
Arrays
Fragments
Returning strings
You can return just a string.
Errors
Catch errors via componentDidCatch. (React 16+)
See: Error handling in React 16
Portals
This renders this.props.children into any location in the DOM.
See: Portals
Hydration
Use ReactDOM.hydrate instead of using ReactDOM.render if you’re rendering over the output of ReactDOMServer.
See: Hydrate
#Property validation
PropTypes
See: Typechecking with PropTypes
any
Anything
Basic
string
number
func
Function
bool
True or false
Enum
oneOf(any)
Enum types
oneOfType(type array)
Union
Array
array
arrayOf(…)
Object
object
objectOf(…)
Object with values of a certain type
instanceOf(…)
Instance of a class
shape(…)
Elements
element
React element
node
DOM node
Required
(···).isRequired
Required
Basic types
Required types
Elements
Enumerables (oneOf)
Arrays and objects
Use .array[Of], .object[Of], .instanceOf, .shape.
Custom validation
Last updated
